NR .21DD Keep Muffled Pipe Clamp

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

David Santistevan

Well-Known Member
Joined
Aug 5, 2011
Messages
1,401
What is a good source for pipe clamps/mount for the NR .21 muffled pipe? The OD of the pipe is 34mm or 1.33".

Thanks,

D
 
david, check out a home supply/hardware store for the rubber cusioned/wrapped stainless clamps. come in a large variety of sizes. they terminate in a flat area with a hole in each end for attaching to the bracket that mounts to the hull. i find them at lowes, home depot & ace/truvalue. the ones i have are UMPCO brand. size # 22 should be what you need.
 
Last edited by a moderator:
david, check out a home supply/hardware store for the rubber cusioned/wrapped stainless clamps. come in a large variety of sizes. they terminate in a flat area with a hole in each end for attaching to the bracket that mounts to the hull. i find them at lowes, home depot & ace/truvalue. the ones i have are UMPCO brand. size # 22 should be what you need.
These clamps can often be found in the electrical parts section of the stores. Take the pipe with you to fit it with the clamp, them get 2, one for a spare.
 
This is a 1.25" clamp from McMasters. There is room to rebend the clamp a little and make it work for the larger 1.33" diameter. I did not notice metric sizes on McMasters, but they usually have them for other stuff.

IMG_7939_zps6dac7e07.jpg
 
Back
Top