Nova .46 carb replacements

[Glenn Quarles]

Friends, if you bought one of the earlier .46 motors that have the 3mm barrel retaining bolt and have had problems with the bolt breaking, please let me know and I will send you a new carb with the 4mm bolt. The new carbs should be here next week.

Sorry for any inconvenience this has caused!

GQ

 

[charles siler]

Glenn what would it cost for a block crank and bearings for a 9 port DD. Im lookin at buying a regular 46 and converting it to a DD thanks Charlie

 

[John Beardslee]

Hi Glenn,

I think you already have me on the list with the 3mm retaining screw carb.

Thanks, John

 

[RonShaw]

Glenn,

Does this affect the IB and OB engines, adj needle/no adj needle, or all of the earlier carbs? I will re-check mine. I have also removed the springs from all of them.

 

[Jose F Cid]

Thanks ,

Glenn this is truly the best customer support that I have ever seen

keep up the great work...I also have a 3mm screw.

Jose

 

[Glenn Quarles]

Glenn,

Does this affect the IB and OB engines, adj needle/no adj needle, or all of the earlier carbs? I will re-check mine. I have also removed the springs from all of them.

Ron, yes any carb that has the small screw is covered. I am not sure what needle configuration these will come with, but it is easy to change that part around. Yes removing the spring is still a good bet! Please let me know if you have one with the small screw and need a replacement.

GQ

 

[Ron Jefferson]

Glenn,

My carb is one of the ones with the 3mm screw so I'll need the replacement. Maybe you can send it with the latest cooling button.

Ron

 

[Rokieboater]

Glenn,

I need a new carb with the with the 4mm screw. Let me know if you need my address. I can also send the old one back if need be.

Robert Holland

 

[LarryConrad]

Glenn,please pm me the total with shipping of the DD conversion, updated water jacket and head button, shorter version of the nitro pipe, and the 4mm screw replacement carb.

Thanks

Larry

 

[Glenn Quarles]

Glenn,

I need a new carb with the with the 4mm screw. Let me know if you need my address. I can also send the old one back if need be.

Robert Holland

Robert, yours is boxed up with David's. Is that OK?

GQ

 

[Glenn Quarles]

Glenn,please pm me the total with shipping of the DD conversion, updated water jacket and head button, shorter version of the nitro pipe, and the 4mm screw replacement carb.

Thanks

Larry

PM sent.

 

[Rokieboater]

Glenn,

I need a new carb with the with the 4mm screw. Let me know if you need my address. I can also send the old one back if need be.

Robert Holland

Robert, yours is boxed up with David's. Is that OK?
GQ

Works for me and thank you.

 

[Blackout]

Glenn,

I have one of the very first .46 motors. Not sure I really need the new 4mm carb. I pulled the spring out and I just can't see that 3mm screw breaking, but just to be safe you could send me some replacement 3mm screws. What ever you think is best.

Craig Mapstone

2816 Smith Road

Canandaigua, NY 14424

Thanks!

 

[gooycheese]

My 3mm screw broke last year... i replaced with a 3mm screw I got from someplace not sure and have had no issues.... now that I say this I know I will have issues lol

If this replacement offer last for a while I will run what I got until I have an issue again if thats cool.... dont wanna replace if it wont be a problem...

Although it may be good to have the fix on hand if and when i do have a break again.

Paul

If you choose to send one glenn my addie is

Paul Bychowski

719 Bolton Way

Hanover Park, IL. 60133

I run a CMB Nitro Pipe, I really cant go any shorter on the header or the pipe.... if the Nova pipe will work like the CMB pipe and be able to get shorter I will be interested in that ... Please send some info for that ...ty

 

[Glenn Quarles]

Paul and Craig, how about if I send you guys a few extra 3mm screws?

Paul, the new Nova pipe we built just for the wrap around motors will go down to about 8.5" or so, the shortest I can get the regular pipe is about 9.25.

Thanks!
GQ

 

[Blackout]

Paul and Craig, how about if I send you guys a few extra 3mm screws?

Paul, the new Nova pipe we built just for the wrap around motors will go down to about 8.5" or so, the shortest I can get the regular pipe is about 9.25.

Thanks!

GQ

Sounds good for me. Thanks.

 

[gooycheese]

Screws are cool with me.... whats the nova pipe for the 46 cost?

 

[Glenn Quarles]

Screws are cool with me.... whats the nova pipe for the 46 cost?

Paul, they are $75. Since I need to send you the screws anyway, I will cover the shipping cost if you want one.

GQ

 

[gooycheese]

Well hold the screws for me for now.. I will order one from you in the future... or probably go thru gary so he gets the buisness

 

[Glenn Quarles]

Craig, your 3mm screws are in with the other stuff in your order. Paul your 3mm screws are on the way too!

GQ