New JAE45 and 21

[lundahl]

Thanks guy's.

Yeah the boat runs great.

Thanks for the advice's from you all.

Now I will try a bigger prop on it.

Fredrik Lundahl

 

[gil sonsino]

Good news!

Gill

 

[GarsonConnor]

Finally got mine running last weekend, it tracks straight and turns on a dime. Rudder on the right and using a Accu Tech short gas turn fin. Motor is a K&B 45 with an OPS 60 pipe, rudder is 2.2" below ski still needs some fine tuning.

Where did you get your cowl?

 

[lundahl]

I made it myself.

sounds great, which prop?. I will work more on my later, maby next week.

Fredrik.

 

[GarsonConnor]

Prop was an Octura 1457, I forgot to mention that your boats looks awesome.

Garson

 

[lundahl]

Thanks.

I used the same prop this weekend 1457 4.5cup.

Fredrik.

 

[brett english]

Finally got mine running last weekend, it tracks straight and turns on a dime. Rudder on the right and using a Accu Tech short gas turn fin. Motor is a K&B 45 with an OPS 60 pipe, rudder is 2.2" below ski still needs some fine tuning.

Where did you get your cowl?

hey Garson just to let you know i just bought a 40 rigger to help the class in our district, D-3 is looking good for 40hydro, we should have close to 9 or 10 consecutive guys running at some of the local state races..

i will post some pictures soon

 

[GarsonConnor]

Brett that's great news.

 

[David Murany]

Well tested the boat today.

Only tested the ops65 pipe and it defiantly needs some more testing.

The big issue is that the boat drags hard to the right.

I have the right spon has a 2mm toe in. Max I can get. To tight fit. The fin is from Mike Hughes any ideas?

Fredrik Lundahl

Sharpening the inside of the turn fin to a shorter more blunt taper can also help this problem. On my 21 JAE I extended the wet point on the left sponson further back as well.

Dave

 

[lundahl]

I also did that to the turfin on my JAE 21. Ran better after

I shall test my boats this week. Next race is the coming weekend.

Fredrik Lundahl

 

[allenrichards1]

Finally got mine running last weekend, it tracks straight and turns on a dime. Rudder on the right and using a Accu Tech short gas turn fin. Motor is a K&B 45 with an OPS 60 pipe, rudder is 2.2" below ski still needs some fine tuning.

Where did you get your cowl?

Garson, are you running at the lake off Copans? I have another 67SGX coming so Im going to be back at that lake soon......For a long time, Ive been the only nitro guy there (well when I am there )

 

[Johnny Brown]

I also did that to the turfin on my JAE 21. Ran better after

I shall test my boats this week. Next race is the coming weekend.

Fredrik Lundahl

Where is the race this comming weekend?

 

[lundahl]

In Ludvika (Sweden)

Fredrik Lundahl