Need Help To Make My Hydro RTR

[Todd Breda]

My 1/8 scale 1982 Pay N' Pak turned out great but it needs to be finished up to get her on the water and I don't have the experience necessary to make that happen on my own. I live in Astoria, Oregon and am looking for someone with FE hydro setup experience within a 50 mile radius (can extend that for the right person) who can help me finish her up.

The motor is installed, ESC needs an EC5 connector soldered, I have a Futaba radio and receiver. Probably need a better prop too. I can provide details if someone responds. Much thanks in advance!

 

[Todd Breda]

Here's the boat...

 

[Rick Sowell]

Contact Loring Miller he is on here by that name, he is with the Emerald RC boat club out of Eugene, Or. he is familiar with FE boats, he can help you or put you in contact with someone that can help you.

 

[Todd Breda]

Thank you!

 

[Todd Breda]

Contact Loring Miller he is on here by that name, he is with the Emerald RC boat club out of Eugene, Or. he is familiar with FE boats, he can help you or put you in contact with someone that can help you.

Ah rats, I tried to PM him and the system said nobody of that name could be found.

 

[Rick Sowell]

Eugene RC boat pond, Delta North Connect, Eugene, Or.
look on the Namba 8 website it has directions to the race site and race schedule. race #4 is June 9th 2024

 

[Rick Sowell]

Ah rats, I tried to PM him and the system said nobody of that name could be found.

contact Mike Hughes on here and he can probably get you the help you need or can put you in contact with Loring or someone that can.

 

[LibertyFrancis]

Ah rats, I tried to PM him and the system said nobody of that name could be found.

@LohringMiller

 

[Todd Breda]

Thank you!

 

[Dave Gilles]

do not use EC5 they are too small for out boats. Get QS8, 8mm bullets, EC8

these are the best Ive ever seen and I highly recommend
https://www.smc-racing.com/index.php?route=product/product&path=66&product_id=762

 

[Todd Breda]

Good to know!

 

[Daniel's Racing]

https://www.intlwaters.com/members/lohringmiller.22688/

https://www.intlwaters.com/conversations/add?to=LohringMiller

 

[LohringMiller]

Thanks everyone, he found me. I'll try to get him set up with a great boat.

Lohring Miller