Need Feed Back

[Tom David]

Wanted to see if anyone has any experience with this engine from Gizmo.

Thinking about installing in a mono.

http://www.gizmomotors.com/index.php/online-store/zenoah/zenoah-marine-engines/29-5cc-cnc-machined-zenoah-race-engine-detail

Thanks,

Tom David

River City Racing Club

Evansville,IN

IMPBA 8110

 

[Al Papitto]

Get the 30! 67 mph in a Laser, 71 in a S45. CoCr AL1 OR HL1 Prop. The 30 has uses a Tiger King full circle crank. Best gas crank available.

 

[Tom David]

Impressive running mono Al.

Are you having any problems with lower needle bearing on connecting rod at high rpm's ?

Also wondered if your running 2 bearings on TK crankshaft or 4 bearings ?

Do you run square end on drive cable or straight cable with clamping collet ?

Any info you could share would be heipful to me.

This will be my first gas build.

 

[Al Papitto]

Impressive running mono Al.

Are you having any problems with lower needle bearing on connecting rod at high rpm's ?

Also wondered if your running 2 bearings on TK crankshaft or 4 bearings ?

Do you run square end on drive cable or straight cable with clamping collet ?

Any info you could share would be heipful to me.

This will be my first gas build.

Cranks are near bullet proof. Two bearing, Rubber seals with spring removed, Round collet. QD pipe @13" 18,800 -19,200 rpm

 

[Tom David]

Thanks for info.

Have a 30 w/billet case, 2 bearings, on my door step from Gizmo.

Again thanks for taking the time to respon on this subject.