My New JAE12

[What up Dog]

I just got it done & it's bad A$$ I can't wait to run it.

Brian

 

[Glenn Gates]

Payment for O.S. remote needle?

 

[joey padgett]

Great looking 12

 

[mike walker]

You be rite Dog looks bad a$$

 

[Bob Morton]

Enjoy. :~}

 

[gil sonsino]

I'm sure you will enjoy it a lot.

 

[hydro rob]

You have to see it in person, all polished engine, and all black anodized hardware, and awesome paint. Custom sponson plugs, 18tz h20, upgraded mount bushings, its bad.

 

[gil sonsino]

Brian is it a "Stilleto"(Dagger boats) in the back of your shop? I had two of these boats in the mid 80's with Picco's 80's........nice to see a canard in good shape again! Congrats for your tiny project.

Gill

 

[What up Dog]

Brian is it a "Stilleto"(Dagger boats) in the back of your shop? I had two of these boats in the mid 80's with Picco's 80's........nice to see a canard in good shape again! Congrats for your tiny project.

Gill

It is I have a Rossi 90 in it. And It's Bad A$$ to.

thx's Brian

 

[shoboat]

Brian,

What propellers are you testing on it?

A 1440 B/C at 3.10" of cup works very well on that

Set up.

Looks Nice,

Mark Sholund

 

[What up Dog]

Brian,

What propellers are you testing on it?

A 1440 B/C at 3.10" of cup works very well on that

Set up.

Looks Nice,

Mark Sholund

Mark It's a V937/3 that's on there now This boat is brand new never in the water yet,

Brian

 

[hydro rob]

1440 no matter what you do to it, wont work on my tz engines, 1440 is a good prop but will not work on a tz, you will blow the rod out the bottom.

 

[hydro rob]

v940/3 or 937/3 is what I use on all my boats and all the other ones around...

 

[shoboat]

Rob,

The V-937/3 is a great propeller, but we did get the

TZ to pull a 1440 B/C and a 40 x 53 B/C . Rob

You must be cupping the blade different or not

taking enough of the blade area away then.

The bottom end of the O.S. Must be a little soft?

RPM is the way to go on all of these boats.

They will not run well with a lot of cup in the trailing edge.

Thanks For Sharing,

Mark Sholund

 

[Blackout]

1440 no matter what you do to it, wont work on my tz engines, 1440 is a good prop but will not work on a tz, you will blow the rod out the bottom.

Interesting, so a 1440 allows the engine to spin to fast and the rod breaks. A friend has an O.S. .12 TZ that he blew the rod on this past season at a race. It was screaming fast right before it happened. Not sure what prop he was running though.

 

[RaceMechaniX]

Hey Brian,

I just picked up this rigger from Ron over the weekend at the District race. Can't wait to get her running.

Tyler