Mongoose Twin 80-90 rigger ( SOLD )

[Joseph Durnya]

Joe Ingrao's OLD IMPBA championship rigger has some tip damage from a shelf collapse but in overall great shape !!

250.00 hopefully local pickup.. but will ship if you cover all costs... its big !!!

Joe

 

[johnsteltzer]

Do you have any of the hardware props drive shafts rudder

 

[FloridaScaleBoater]

Do you have any of the hardware props drive shafts rudder

The rudder is sitting on the transom, turn fin on the table,
Shafts are cheap considering what it will cost to power it.

 

[Joseph Durnya]

the rudder is shown in one of the pics but what you see is what you get !

thanks for looking ! Joe

 

[MarkDanielsSr]

I'll take it, Pending a PM discussion with seller on his knowledge of shipping.

 

[Joseph Durnya]

I've shipped boats to Sweden, Switzerland, Hong Kong, England.. to name a few back in the day.... if it gets damaged it wont be due to improper shipping !!! LOL

 

[MarkDanielsSr]

Thanks, I just sent you basically those questions. PM me the address after you check my mail and I will send money.

 

[Joseph Durnya]

Still Available !!!

thanks, Joe

 

[johnsteltzer]

I will give you 175 .00 plus shipping

 

[Joseph Durnya]

Guys this boat is big... i measured it up for Mark Daniels the boat is 48 x 24 x 5 USPS calculated that as 79.00 to him.. now in reality i would have to get a box maybe 54 x 28 x 8 for adequate padding.. when i plugged those dimensions into usps it threw an error so i would have to take this to the post office to see if they would even ship it and im guessing that it would be even more than 80 bucks not even including packaging materials... so a local pickup would be desirable !!

 

[Greg Wannamaker]

Guys this boat is big... i measured it up for Mark Daniels the boat is 48 x 24 x 5 USPS calculated that as 79.00 to him.. now in reality i would have to get a box maybe 54 x 28 x 8 for adequate padding.. when i plugged those dimensions into usps it threw an error so i would have to take this to the post office to see if they would even ship it and im guessing that it would be even more than 80 bucks not even including packaging materials... so a local pickup would be desirable !!

Hey there Joe, what you’ve got there can easily be broken down with the sponsons taken off to get it all tightly packed into a long torpedoe box, that should save you and the buyer some shipping $$. It’s an old school twin but at $250, that is not unreasonable. If anyone is worried about that price, they haven’t built a twin lately, geared up, they will then think back on the first 250 as a drop in a very large bucket.
Good luck with your sale and hope you find an appreciative home for it!

 

[Joseph Durnya]

Greg, unfortunately you cant remove those sponsons with out destroying the boat. ( or at least the sponsons ) the brass tubes corrode to the alum booms very quickly...

Joe

 

[happybradboating]

Greg, unfortunately you cant remove those sponsons with out destroying the boat. ( or at least the sponsons ) the brass tubes corrode to the alum booms very quickly...

Joe

I had the same problem with my Mongoose Twin. The brass is a problem.
Brad

 

[Jeff Lutz]

Greg, unfortunately you cant remove those sponsons with out destroying the boat. ( or at least the sponsons ) the brass tubes corrode to the alum booms very quickly...

Joe

I would ship it like it is, but whoever buys it can cut the booms off with a bandsaw and they should be able to heat the brass up with a torch and get them to turn loose from the epoxy without destroying the sponsons.

 

[Joseph Durnya]

I had the same problem with my Mongoose Twin. The brass is a problem.
Brad

Brad, i have had a couple dozen mongoose ~ mongeese ? LOL over the years .. they are all the same

I would ship it like it is, but whoever buys it can cut the booms off with a bandsaw and they should be able to heat the brass up with a torch and get them to turn loose from the epoxy without destroying the sponsons.

Jeff, suggested reason for removal ( by others ) is to fit the boat in a smaller box for shipping.. no reason to cut the sponsons off after the fact !

Joe

 

[Jeff Lutz]

Brad, i have had a couple dozen mongoose ~ mongeese ? LOL over the years .. they are all the same




Jeff, suggested reason for removal ( by others ) is to fit the boat in a smaller box for shipping.. no reason to cut the sponsons off after the fact !

Joe

Read what I wrote again about how I would ship it. On the other, I was kindly spending my time giving an idea to any potential buyer so they know if they have a freaking wreck they can get it apart to make proper repairs.

 

[Joseph Durnya]

Ahhhh 10 -4 thanks !

 

[Joseph Durnya]

Mongoose Twin SOLD !!