Lots of stuff for sale. 2 Villain Ttunnels, M8 radios and accys.

[topfuel443]

Hi Guys, I am selling off a bunch of stuff that I have made myself realize I will never use anymore. I will only accept paypal at this point, and the prices listed include the shipping to the US. The first person to respond to this thread has first prioirty.

Updated what is still for sale.

Lower prices, I am giving most of this stuff away.

 

[topfuel443]

Update.

 

[topfuel443]

Next up is a Bandit 1/4 scale size fiberglass cowling. I bought this a year or two ago with the idea of scratchbuilding my own 1/4 scale tunnel, and was going to use it for the cowling. I am no longer going that route, so its back up for sale. It has a good paint job on it, not perfect, but certainly usable. I dont have demensions right now, but will get them. The shipped price is $100.00 (this thing is BIG)

Next up is a new Futaba Magnum Junior AM 2 channel 75MHZ Radio on channel 74. This does not come with a reciever, only with what you see. If you can use it, you pay for shipping and its free. Just dont want to throw it out.(about 6 bucks ??).

Next up is a lot of crystals. They are $5 each. or this whole lot for $23.00 shipped. There are 5 RX crystals and 1 TX crystal. They are for Airtronics FM 75MHZ, Channel 78.

Next up is another lot of crystals. $5 each. or this whole lot for 30.00 shipped. There are 6 RX crystals, and 3 TX crystals. They are also for Airtonics FM 75MHZ, Channel 76.

Next up is a 40 MHZ Module and 2 channel reciever for Airtonics M8/M11. They are new, never used. No crystals. $40.00 shipped

Next up is good condition 92836 Airtonics 3 channel FM 75MHZ micro reciever. No cyrstals. $30.00

 

[topfuel443]

Next up is a NOT SO good condition 92836 Airtonics 3 channel FM 75MHZ micro reciever. No cyrstals. $20.00, shipped. Works great but the case is beat up/broken.

Next up is good condition 92836 Airtonics 3 channel FM 75MHZ micro reciever. No cyrstals. $30.00 shipped

Next up is good condition 92836 Airtonics 3 channel FM 75MHZ micro reciever. No cyrstals. $30.00 shipped

Next up is a used Airtronics M8 radio with module and battery holder. No receiver or crystals. small crack on the front botttom portion, nothing major. Works great, antenna needs to be replaced. $45.00 shipped

 

[topfuel443]

Up next, another Novak Switch Synthesized Module. This one has been used, but work great. Fits the M8/M11 and is 75MHZ. Price, $45.00 shipped.

My Paypal address is [email protected]

More stuff for sale later.

Thanks, James

 

[moparbarn]

james, ygm.

 

[HTV Boats]

PM sent

 

[waltr]

James,

I'm interested in the big cowl if it's not sold.

Shoot me a few dimensions when you get a chance please

 

[Marc Pagé]

Hi, I'll take these:

Next up is a spare battery holder for the M8. Used, but works fine. $5.00

Up Next is a new Novak Switch Synthesized Module for the M8/M11. This is new, unused. $65.00

Up next is a used Novak Synthesized reciever. It is a 5 channel unit, on 75MHZ. I used it with my M8, but I think it can be used foir many different models. $45.00

Next up is a used Airtronics M8 radio with module and battery holder. No receiver or crystals. Works great, no problems at all $70.00

I just need a comfirmation about the shipping price ? I leave in Quebec, Canada at g1b 3k7 (postal code)

As soon as you answer me, i'll paypal you!

Thank's

 

[Jerry Wyss]

James,I'm interested in the big cowl if it's not sold.

Shoot me a few demensions when you get a chance please

Hey Top, If ya send that cowl thru Oz to 'waltr' it would be the first 1/4 scale cowl to go round the World

 

[waltr]

James,I'm interested in the big cowl if it's not sold.

Shoot me a few dimensions when you get a chance please

Hey Top, If ya send that cowl thru Oz to 'waltr' it would be the first 1/4 scale cowl to go round the World

Wow,

A world class cowl. With experience.

With all that experience,I hope it's smart enough to stay away from the buoys.

 

[moparbarn]

James,I'm interested in the big cowl if it's not sold.

Shoot me a few dimensions when you get a chance please

Hey Top, If ya send that cowl thru Oz to 'waltr' it would be the first 1/4 scale cowl to go round the World

Wow,

A world class cowl. With experience.

With all that experience,I hope it's smart enough to stay away from the buoys.

walt, unfortunately, cowls are only as smart as the driver :lol: . anybody heard back from james, yet?

 

[Flyguy55]

You have a PM on the FE

 

[Jerry Wyss]

That cowl would spit a bouy in Half! Just what'cha need, a bouy splitter :lol: Top's gonna Kill Me!

Its tough waltr, I hit a boat house with it on about 40mph and it survived with just a small

brush in the clear. Would be great on a gasser and the paint job is still good if Top hasn't been

whackin' dogs with it

It's a cut down (heigthwise) Bandit "Desperado" cowl made by Dorian of Bandit Boats, Very Strong

, It was either cut it down or paint a "Greyhound" bus scheme on the side.

 

[waltr]

Hey Jerry,

I really don't plan on hitting any houses with it.

Hmm... I've hit alot of things,but no houses YET.

Was thinking about using it for a nitro boat.

Mike Crawford is building me a custom 40" boat for my 11s and 13 OPS OBs. The cowls he uses are the Dumas 7.5 cowls and there just a bit small for the bigger hulls. So, if it doesen't weigh a ton,it's an option for the 40" hull instead of the Dumas.

 

[waltr]

Double post. :huh:

 

[topfuel443]

Hey Guys, sorry for the delay, ive been outside working on my truck most of the day.

Heres the skinny so far:

Robin (moparbarn), you were the first to ask about the Bud Villain, so you have first dibs. I have read your pms...... I just got off the phone with you, and the red bud villain is gone.

Mic, Im sorry, but Robin got to it first. Im glad you got the OS, and your Rossi (got it yesterday) should be heading back to you on Mon or Tues.

Walt, the cowl is yours at this point. I will go down and get some measurements and reply on here.

Marc Page, the stuff you listed is yours. Just send paypal for what it totals up to and I will get it shipped prioirty international. No problem going to Canada.

Jerry, the cowl is still just like you sent it to me. It will make a 1/4 scale look very nice, it was just what I was looking for when I was going to build my own.

Flyguy55, I never recieved a PM from you. I will give you first dibs on the FE boat, but I have another guy (via email) ready to make a move on it so he has seconds. Let me know.

I think that covers everyone?

~James

 

[Flyguy55]

Hey Guys, sorry for the delay, ive been outside working on my truck most of the day.
Heres the skinny so far:

Robin (moparbarn), you were the first to ask about the Bud Villain, so you have first dibs. I have read your pms...... I just got off the phone with you, and the red bud villain is gone.

Mic, Im sorry, but Robin got to it first. Im glad you got the OS, and your Rossi (got it yesterday) should be heading back to you on Mon or Tues.

Walt, the cowl is yours at this point. I will go down and get some measurements and reply on here.

Marc Page, the stuff you listed is yours. Just send paypal for what it totals up to and I will get it shipped prioirty international. No problem going to Canada.

Jerry, the cowl is still just like you sent it to me. It will make a 1/4 scale look very nice, it was just what I was looking for when I was going to build my own.

Flyguy55, I never recieved a PM from you. I will give you first dibs on the FE boat, but I have another guy (via email) ready to make a move on it so he has seconds. Let me know.

I think that covers everyone?

~James

 

[Flyguy55]

Hi James

I said PM , but it was E mail , sorry. Likely we're the same guy. ( dickmr) ?

How are you coming on the props ? might all go in the same box ?

I'll send PayPal today

Thanks , Dick R

Flyguy55, I never recieved a PM from you. I will give you first dibs on the FE boat, but I have another guy (via email) ready to make a move on it so he has seconds. Let me know.

I think that covers everyone?

~James

 

[Jerry Wyss]

Hey Jerry,I really don't plan on hitting any houses with it.

Hmm... I've hit alot of things,but no houses YET.

Was thinking about using it for a nitro boat.

Mike Crawford is building me a custom 40" boat for my 11s and 13 OPS OBs. The cowls he uses are the Dumas 7.5 cowls and there just a bit small for the bigger hulls. So, if it doesen't weigh a ton,it's an option for the 40" hull instead of the Dumas.

Howdy,

Nice Looking OB! never got to run any exotic o/b power when I ran the bigger tunnels,, did get to mod a couple KB

11's that ran purdy good on a few of them big plastic boats,, went thru 3 of'em,, taught me allot,, on how to make

plastic stay together that is,,,