• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Boats Wanted Looking for Well Sorted Slingshot Gas Rigger

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Martin Law

Well-Known Member
Joined
Jun 26, 2022
Messages
192
Hi all,

Getting back into the hobby and looking for a well sorted Slingshot or equivalent Gas rigger RTR or ARTR. Stock or mod engine okay.

Please send me what you have...

Thanks,

Marty
 
Those were the good ol' days especially when you didn't have to go too far to race and we had the Nats here in Oxford.

I thought this hobby was expensive back then but now it's rediculous...rude awakening for me that's for sure...
 
You might consider having Bob Blazer just build you one. He does awesome work and these boats are hard to find used.
 
Mike,
I have contacted them thru their website with no response over the last month. Not sure if there is a better way to contact them.
Marty
 
Thanks Ken!
I sold my 5 vintage riggers and all my nitro gear to Chris Capaldi last year which he sold off most of the collection. He's been playing around with some of my old boats and invited me out to Messina pond to watch. Then I see Teddy Dudley run his new gas twin and scale boats which was a huge mistake. Next thing I know, I'm hooked again! So here we go...
Marty
 
Hi Kevin,

Glad to see you are still at it! Some habits are hard to change...I think it's in our blood.

Thanks,

Marty
 
Martin,

I have a brand new Slingshot Rigger that has seen water twice. Boat comes complete with Gizmo modified Big Block & Zippkits Exhaust Manifold & Pipe. Boat is setup for square drive and includes new drive cable, Insane Extended Strut w Prop Shaft & Daniel Place Strut Clamping Washers. Paint is DuPont Automotive w Hardener & an Epoxy Clear Coat on top. All decals are removable and not cleared over. A custom built new wood stand and boat cover is included as well. Add your receiver, radio & prop and your ready to go.

2k plus the ride, PayPal FF is ok or add the 3% please.

Note: Some of these pics were taken during the assembly stages before the boat was finished.

Let me know if you need any additional information or photographs.


Thanks,

Ronnie King
NAMBA #1223
 

Attachments

  • 63496032737__3EF212A3-2855-4AD0-BC17-06B9FAE822DA.JPG
    63496032737__3EF212A3-2855-4AD0-BC17-06B9FAE822DA.JPG
    913.6 KB
  • 63504718150__EBB9DD47-136B-478A-852B-F84C112E6185.JPG
    63504718150__EBB9DD47-136B-478A-852B-F84C112E6185.JPG
    949.2 KB
  • 63565289002__797EC689-0B5B-402E-AD66-D9A597F93160.JPG
    63565289002__797EC689-0B5B-402E-AD66-D9A597F93160.JPG
    876.4 KB
  • IMG_5083.jpg
    IMG_5083.jpg
    661.8 KB
  • IMG_5155.jpg
    IMG_5155.jpg
    386 KB
  • IMG_5242.jpg
    IMG_5242.jpg
    536.5 KB
  • IMG_5404.jpg
    IMG_5404.jpg
    818.9 KB
Martin,

I have a brand new Slingshot Rigger that has seen water twice. Boat comes complete with Gizmo modified Big Block & Zippkits Exhaust Manifold & Pipe. Boat is setup for square drive and includes new drive cable, Insane Extended Strut w Prop Shaft & Daniel Place Strut Clamping Washers. Paint is DuPont Automotive w Hardener & an Epoxy Clear Coat on top. All decals are removable and not cleared over. A custom built new wood stand and boat cover is included as well. Add your receiver, radio & prop and your ready to go.

2k plus the ride, PayPal FF is ok or add the 3% please.

Note: Some of these pics were taken during the assembly stages before the boat was finished.

Let me know if you need any additional information or photographs.


Thanks,

Ronnie King
NAMBA #1223
Beautiful boat Ronnie. Makes me really think about owning a gas boat

Virgil Ericksen
 
Back
Top