Boats Wanted Looking for SGX 90-101 or similar

[Rich Junker]

Appreciate all the comments and recommendations.
Just trying to get more of my family involved with the hobby.
They know it's an expensive hobby like 1/8 scale nitro buggy racing they did for 10 years.

They thought it would be a great hobby to get into, meet great people make new friends and have a blast racing nitro boats.

But, I guess since trying to get in without breaking the bank is.not going to happen as you all suggest then I guess they need to find a different hobby.

Don't give up! As you know we need all the newer and younger boaters we can get.

 

[Rich Junker]

Don't give up! As you know we need all the newer and younger boaters we can get.

With Al's new engines and Zipp Kits you can build a 21 or 45 rigger really reasonable. And they are normally the largest classes at most of the races.

 

[doug long]

With Al's new engines and Zipp Kits you can build a 21 or 45 rigger really reasonable. And they are normally the largest classes at most of the races.

Thank you Rich for the suggestions, I spoke with the boys about what was discussed on this thread and they have decided to take a step back and think about getting back into 1/8 nitro buggy racing. A little less expensive and they made alot of new friends racing these three states

 

[Tom Foley]

Appreciate all the comments and recommendations.
Just trying to get more of my family involved with the hobby.
They know it's an expensive hobby like 1/8 scale nitro buggy racing they did for 10 years.

They thought it would be a great hobby to get into, meet great people make new friends and have a blast racing nitro boats.

But, I guess since trying to get in without breaking the bank is.not going to happen as you all suggest then I guess they need to find a different hobby.

You can get in cheap but just not at the top of the food chain ! Go look at what ready to run toy electric boats run now . If you raced 1/8 scale buggies you had thousands involved . Anyway Mike's boat can win anywhere with a stock 91 and some good props . Props are everything for speed .

 

[Tom Foley]

With Al's new engines and Zipp Kits you can build a 21 or 45 rigger really reasonable. And they are normally the largest classes at most of the races.

Still going to have $500 in the boat with radio paint ,hardware and a tank . Is what it is as they say !

 

[Jeff Lutz]

Still going to have $500 in the boat with radio paint ,hardware and a tank . Is what it is as they say !

Als engine is $385 but you have to buy a carb, make it $485 plus the $100 kit plus shipping. Still need a header,pipe,collet,prop,flex shaft,drive dog,servos,paint,tank,epoxy,etc,etc. I’m thinking $1,100-$1,250ish… for a Jae combo?

 

[Jeff Lutz]

Thank you Rich for the suggestions, I spoke with the boys about what was discussed on this thread and they have decided to take a step back and think about getting back into 1/8 nitro buggy racing. A little less expensive and they made alot of new friends racing these three states

I saw a ad with you looking for Crapshooters for your boys. Surely you didn’t tell them they could get one for $350 shipped, possibly? I mention that only off the $350 offer for the SG 90. I’d say they could get into a Jae .45 combo for about what a team 1/8th nitro buggy would cost.

 

[doug long]

I saw a ad with you looking for Crapshooters for your boys. Surely you didn’t tell them they could get one for $350 shipped, possibly? I mention that only off the $350 offer for the SG 90. I’d say they could get into a Jae .45 combo for about what a team 1/8th nitro buggy would cost.

They knew if they found crapshooters it would be an expensive purchase.
I don't have a clue what his repaired sg is worth, I threw a number out there to see if would negotiate, but apparently not and then everyone chines in to not low ball him.
Well, my bad, I just keep my mouth shut and fingers off the keyboard and let the boys run my boat.

 

[Jeff Barnes]

I have a 12 hydro for 300 they can afford that

 

[doug long]

I have a 12 hydro for 300 they can afford that

No thanks Jeff, they are not going to be buying any boats.

 

[Tom Foley]

Als engine is $385 but you have to buy a carb, make it $485 plus the $100 kit plus shipping. Still need a header,pipe,collet,prop,flex shaft,drive dog,servos,paint,tank,epoxy,etc,etc. I’m thinking $1,100-$1,250ish… for a Jae combo?

Complete yes , I was more commenting on the boat minus pipe , engine , prop like Mike's boat is setup .

 

[Jeff Lutz]

Complete yes , I was more commenting on the boat minus pipe , engine , prop like Mike's boat is setup .

Oh yea, I knew you were referring to boat only. I just expanded that into the full combo and it’s probably more like $1,300 for a Jae combo not including a radio. But 1/8th buggies can cost $1,800 in a heartbeat.