Looking for pressure fittings

[Robert Pickard]

Looking for a presure fitting for a 45 outboard pipe thanks

 

[charles siler]

Get ahold of John Otto

 

[Robert Pickard]

He was my first call he said he does not have any

 

[Mike Byer]

What brand/ style are you looking for?

 

[Brian Sorgente]

call speedmaster

 

[Robert Pickard]

For a outboard 45 pipe

 

[tom galdys]

You can always use an exit water cooling fitting that you use for an inboard non rigger that exits out the side

 

[FloridaScaleBoater]

For a outboard 45 pipe

Robert,

What exactly are you looking for?

John is showing a "Butt Load" of the Tetra 90* fittings in stock.

And I'm sure he has some of the Mac's thin wall pressure fittings

 

[Robert Pickard]

I called he told me he had nothing for the outboard pipe, it has a 10- 24 thread, The tetra does not work on a O.B. pipe must have a 10-24 threading to go into the pipe

 

[brad nichols]

Accu-tech could have some.

Brad

 

[PaulHail]

Personally I'd just drill and tap the pipe 10-32 and use a 10-32 fitting. Plenty of 10-32 fittings in straight and 90 degrees. Offshore electric has a good selection and decent prices.

 

[Robert Pickard]

The pipe is made already for a 10-24 all O.B. pipes come drilled and taped

 

[PaulHail]

If the option is between not being able to find a fitting for the thread the pipe is d/t'd for and changing it to a thread one can easily find fittings for, I was sharing the approach I'd take.

 

[EmilSkog]

By one of the 90% pressure fittings from John drill out the hole thread the pressure fitting in from inside of the pipe put the washer and nut after applying some locktight on the threads you will never have to replace the fitting again never less worry about stripping out the threads....

 

[Robert Pickard]

This is a J pipe where you do not have that kind of room to work, unlike a regular nitro boat, wish i could but no room

 

[John Otto]

Robert

If you want to,send me your pipe and i will do what it takes to get you going

John

 

[Robert Pickard]

Thanks John please PM address