Parts Wanted LF CMD Billet Header for 91/101 VAC/RS

[RaceMechaniX]

Guys,
Anyone have a 10Deg CMD billet header for a 91/101RS style motor they are willing to part with?

Thx,
-Tyler

 

[Joe Warren]

Guys,
Anyone have a 10Deg CMD billet header for a 91/101RS style motor they are willing to part with?

Thx,
-Tyler

We need someone to build several, Those Tiny Orings on the stock header are a great way to burn down a engine. Gabe at Stump Fab knows there is a need. That does not mean he is going to build some?

 

[Tom Foley]

One thing that helps is to use two springs on the header to stop it from moving around as much . The edge of the exhaust spigot on the engine is really too short and will chafe the o rings quickly if the header is allowed to move around .

 

[BigChuck]

Put up the same post in Nov...There out there.....getting some to part with them...WHOLE DIFFERENT BALL GAME!!

 

[John Beardslee]

One thing that helps is to use two springs on the header to stop it from moving around as much . The edge of the exhaust spigot on the engine is really too short and will chafe the o rings quickly if the header is allowed to move around .

That and making sure the exhaust snout is smooth with no sharp edges. I also use Viton o-rings.

 

[Richard Dahlheimer]

Try Double Ace racing products. They show a .90 billet header in the pipe page. Richard

 

[johnsteltzer]

I made my own headers look at the difference in tube size in the last picture

 

[BigChuck]

John..Git er done...Ill take a set....YESTERDAY!!!

 

[SayMikey]

I took the same style header for a 67-80 oringed version and stuck it in my lathe. Cut the inside of the leadin up to accept a modern rubber seal

 

[johnsteltzer]

I heard that I will get a couple sets of headers and make some and let you know when they are ready thanks

 

[Ronnie King]

John,

I could use one or two if available.


Thanks !

Ronnie King
NAMBA #1223

 

[johnsteltzer]

Yes I will be building 4 91 headers in a couple of weeks I will have to figure out the price I will
Let you know when they are ready

 

[brad nichols]

Did you try 1 from Al Hobbs or AA Racing?

Brad

 

[RaceMechaniX]

Yes I have one of those, but the CMD version is just a little slimmer.

Still looking.

 

[Joe Warren]

Did you try 1 from Al Hobbs or AA Racing?

Brad

Al hobbs Billet header is 3/4 intended for a 67

 

[johnsteltzer]

Yeah you are right joe I am taking those and drilling them out and cutting the tube off and and tig welding a new correct size tube on there and they will come with a new high temperature grommet thanks

 

[BigChuck]

Now you say that..Have 4 of them.... to small for the 101...HAD is operative word.

 

[johnsteltzer]

I make them the right size on the flange I bore them out and tig a new piece of tubing on there

 

[RaceMechaniX]

Bump. Still looking for 10 Deg headers.