• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Leecraft

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mark Anderson

Well-Known Member
Supporting Member
Joined
Nov 22, 2002
Messages
1,046
Xt-460 epoxyglass boat. It is 4-5 years old. Former NAMBA record holder. The paint is a little rough but the boat is in good shape. Add motor and radio and win races with a proven boat. $100.00 plus shipping

Mark
 
hello mark.

do you have any pics of the hull??

and,,did you need to add weight in the sponson tips.

there was a review in boat modeler mag.about doing that,just wondering of you did that.

thanks for any info you can give me!!

mark james

p.s I still have not herd anything about the linx

e-mail any reply to [email protected]
 
oops my mistake

the hull with the weighted sponsons was a different hull. but still would like info on the leecraft

mark

(IT HAS BEEN A LONG DAY !!)
 
Yes, the boats require some weight to be added to the front to get the c.g. right depending on what power option you go with. Most any tunnel will require the c.g. to be adjusted depending on how you set up the boat. I have run theis boat with 7.5 stock and mod, and 11cc stock all three required different amounts of weight on the front. Being epoxy the boat was a pound lighter than the polyester Lee it replaced. I held the NAMBA straight away record for 7.5 stock a few years ago with this boat and ran it for several years as a mod with great results.

Mark
 

Latest posts

Back
Top