Lawless 3.5 Screws

[jaxracer]

Anybody have any idea what size screws are used to mount the Lawless 3.5 cavitation plate? Looking to get some a little longer so I can shim the cav plate up for a little extra prop clearance.

Thanks,

-Mitch

 

[Dave Grote]

I had to make a new plate that was longer for clearance

 

[Wally Marsh]

Mitch,

Not for sure at work right now but pretty sure Fred uses SAE threads except for OS prop shaft assembly. I know they're smaller than bolts holding lower halves together, maybe 4-40 with the counter sunk Phillips heads?

Wallster

 

[ggeiselman]

They are smaller than 4-40. I think they are a 2-56 maybe?

 

[Brian Sorgente]

I'm pretty sure they're 2-56. Email Fred, he's usually pretty good about replying fast.

Brian

 

[Wally Marsh]

Just measured them at home and verified at McMaster-Carr, they are 2-56 x 1/4 flat head Phillips stainless, if hobby shop doesn't have them McMaster-Carr does in various lengths.

Wallster

 

[Kris Flynn]

Or make a new plate with a slight bend in it

 

[Robert Pickard]

2/56 ace carries them

 

[jaxracer]

Just measured them at home and verified at McMaster-Carr, they are 2-56 x 1/4 flat head Phillips stainless, if hobby shop doesn't have them McMaster-Carr does in various lengths.

Wallster

Thanks Wally! Yeah I couldn't find them at the local hobby shop so I ordered a pack from McMaster-Carr. Much appreciated.

Thanks guys,

-Mitch

 

[Robert Pickard]

Mitch Ace Hardware carries them