I hope to be able to make a list of props within a couple of weeks. Have a few friends that need props also (FE and nitro). For myself I like the KV to be on the higher end so one dont need to go too far up regarding pitch (and cup) etc.
Hi Bob, sorry but Im not the one to suggest any optimized props for that set-up I think. When we did the testing of the KEP's FE proto's we did test with a couple of SSS 3660 motors but the performance was not "super good". One was around 2300KV and the other 2700KV. None of them had any power to brag about and the 2700 one didn't want to rev either... Thats a reason why I did an slightly smaller FE-4SL P-Limited version as I guess it's easier to get them power limited ones going with less weight and size etc.
I'll check. Note, so far we've only used the 3.5 props we have in stock so to speak. Ive got no "FE specific" prop as of yet. Need to charge the laptop where I have the Castle logger info. Give me 30 minutes until it lights up.
Note, when we tested it in "P-Limited" spec, the boat, esc and batteries was the same as when we tested it in full P spec so to speak. The reason we tested the smaller motors was to see if we wanted to go that route in our first FE outrigger class in Sweden. So we did some basic testing to see if we wanted to run that. We never really optimized the set-up regarding load, revs and props etc. I ran it with dual paralell 4S 2200's, 2650's and 3300's. Tested with single 3300's also and the way we ran them, run-time was not an issue (6 race laps + a couple more).
Drop down to a 1716-17
