K&B 3.5 parts

[geoffreysherrah]

WTB K&B 3.5 pistons and sleeves. Or just the pistons with connecting rods. I have several sleeves. A flex shaft, exhaust adapter, and hinge mount for an old lower OB.

A needle valve stem and rubber O rings for black carbs and gasket sets for the case.

 

[ian thompson]

Hi Geoffrey, I have several piston/liners. Which model are you after? There are different cylinder od`s ,flange ods & thicknesses & exhaust ports.. Can probably help with the exhaust adaptor if its for a water cooled OB engine. I also have a couple of the old prop shafts non screw in if you need them.Have some New black carbs complete.Red too . Pretty sure I have some flex shafts maybe gaskets..Have cylinder heads & water jackets. New 12mm OB crankshafts..

The downside is I am in Perth Western Australia so shipping my kill it for you..

PM me if you want me to dig out parts for you.

Also MECOA still make some parts..

cheers

Ian

 

[bob miller]

try bob kensill

 

[tom galdys]

Tell me what you need, I have so many parts, all except the hinge plates, cases both old and new style, p/s's new and old style, rods(many) front plates, rear plates. most everything is used but quite usable. Can send pictures but there are 100's of parts. Tom Galdys

 

[geoffreysherrah]

Tell me what you need, I have so many parts, all except the hinge plates, cases both old and new style, p/s's new and old style, rods(many) front plates, rear plates. most everything is used but quite usable. Can send pictures but there are 100's of parts. Tom Galdys

 

[geoffreysherrah]

Yes, I would love see pics! Or a list. All I really need is my list posted... unless you can give me good deal for all of it. PM me when you can please.