Jae 33Fe V2 best motor choice on 6s

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BOB MITCHELL

New Member
Joined
Sep 10, 2012
Messages
4
Hello,
I'm away to start the kit this week, looking for help with motor options.
Not planning to race Looking for good speed.
Thanks
Bob
 
I run the TP Power 4060 - 1650kv motor if my memory is correct and a 160a Spektrum esc for the telemetry. Boat runs about 70mph on a 6s5000mah pack using a ABS H-7 prop.

 
One thing to consider is too much power. If you power beyond a hulls capability you have an ill handling boat that is a nightmare to drive. Easy to overpower with FE and power takes more battery. As Shawn said our 4074 setups perform and run efficiently. Plus cost for motor and esc stay reasonable.
Mic
 
A 2080kv on 6S is a SAW or 2 lap record setup. Works but very narrow and precise range of props. We use 1400-1700kv motors and M445 -1450's - 1717 &1719 /38 props. 65 to 70 mph and you don't need to lift in corners. 140-160 amp draw with a 4074 allows inexpensive Flycolor 150's
Mic
 
A 2080kv on 6S is a SAW or 2 lap record setup. Works but very narrow and precise range of props. We use 1400-1700kv motors and M445 -1450's - 1717 &1719 /38 props. 65 to 70 mph and you don't need to lift in corners. 140-160 amp draw with a 4074 allows inexpensive Flycolor 150's
Mic
Ideal Mic, thanks for your great advice.
Regards
Bob
 

Latest posts

Back
Top