JAE 12 and 21 Boat stands

[tmunn]

Does anyone have any plans or ideas for a lightweight yet sturdy and functional boat stand for thes little riggers ??

Looking for ideas

Terry

 

[shawdaddy]

Here is the one I made for my 21 boat. Hope this give you some ideas. Ryon

https://www.intlwaters.com/gallery/displayimage.php?album=531&pos=0

https://www.intlwaters.com/gallery/displayimage.php?album=531&pos=4

 

[Neil LaGarry]

Here is one i built over the winter. No nail oak , mahogany, birch dowels

 

[Ron Olson]

Terry, Jim Geiger and I are working on getting some stand kits made, CNC'ed. I have to come up with some sketches and measurements for him.

 

[tmunn]

Yes ron, i know and would be interested possibly .

Did you get my measurements from the dock for the boom tube collars that i use on the 12 and 21.

I will be away from the puter for a bit but check on the dock...

 

[Alexander King]

Stands are on the way ....keep your eyes open ......

 

[tmunn]

Is there any update on the stands for the JAE 12 and 21 I do not do well making stands out of wood from scratch for riggers

 

[Alexander King]

Is there any update on the stands for the JAE 12 and 21 I do not do well making stands out of wood from scratch for riggers

contact Joe at ZippKits

 

[Tom Foley]

I make theses stands with a place to put the shaft , tanks , props etc for drying out after post - race disassembly . They take about an hour or so , and cost about ten bucks or less using pine and wood lattice strip for the little sides on the lower portion . Very stable and durable .

 

[shawdaddy]

Nice looking stand for the twin, Tom. I need to make one of those for mine. looks like a simple build.

 

[Neil LaGarry]

The front boom is so forward,you'll need a goose neck to hold it. here you go making stands

 

[JSCARPINO]

Hello Terry

I have designed a stand for both the .12 & .21.

Check out the Manufacturers/Distributors For Sale section

and look for JRS Innovations.

Thanks

Joe

 

[Alexander King]

here are a few photos of the .12 stand a cheap and simple solution. check Zipp kits to see if they will be availble

 

[tmunn]

I am waiting on Joe at zipkits.thanks for your comments

 

[Neil LaGarry]

I just mailed out a stand for Joe Petro, He should have it this week.

all wood came from Home Depot in the Hardwood section

 

[153stars]

http://www.intlwaters.com/index.php?showtopic=36005&st=45

Sorry too lazy to find the exact pic. It's like two block style H es with a cut out for ski , two squares and notch for booms. Drilled dowels through. Wood was from hobby lobby on sale cheap. Used bob smith finish coat epoxy. Could extend the rods add one more piece ply to guard prop.

 

[153stars]

http://www.intlwaters.com/index.php?showtopic=36005&st=45

Sorry too lazy to find the exact pic. It's like two block style H es with a cut out for ski , two squares and notch for booms. Drilled dowels through. Wood was from hobby lobby on sale cheap. Used bob smith finish coat epoxy. Two posts down is Lil Als boat same stand we did them same time in his basement better shots

 

[Rokieboater]

JRSInnovations has the best stands available. He is on here you can do a search for his work.

Robert

 

[HOTWATER]

JRSInnovations has the best stands available. He is on here you can do a search for his work.

Robert

Here you go ---> http://www.intlwaters.com/index.php?showtopic=39427

I just ordered one for my .21 JAE...Very nice composite stands!

-Kent

 

[tmunn]

Sorry Guys I cant bring myself to 55.00 plush shipping and handling plus more money fro engraving .Too rich for me.

Besides the price from what i can tell the ski alone will bare the weight in the rear or any down force from starting etc..

Very nice but expensive.I only know one guy that uses that type of bling