Irwin Engine ???

[waterbug]

James

Where are you Sir...???? How is the engine coming...!!

 

[Jerry Wyss]

I was wanting to ask this question myself back when He came on last talking about his "New Secret Pipe" He was goin' to "reveal at Atlanta". But I didn't want to push it,,,He sorta lost his "Hype" sale I think.

 

[waterbug]

I don't know if I can wait on him, my season starts in two weeks.....!!!! Feb. 19 & 20 Grand Prix, High Points the first of March .........

It looks like plans are made to be broken in my case :lol: I need my new hulls QUICK like..... You GUYS hear me.......!!!!! :huh: :lol: :lol:

 

[Brian_Nelsen]

Well This much I can tell you, he is proceeding with the project. I know this because I just finished 300 complete prop shaft assemblies for him. He still has 300 more on order.

I am not sure if many of have have ever dealt with a project like this but it is major hard and major expensive. I have been trying to release my 7.5 outboard engine for three years now. seems there is always something going on to slow the project down. I am very close but that only counts in horse shoes and hand gernades.

Jim is working on his engine and I know he is near completetion. Believe me he is just as frustrated as you are.

Thank You

Brian Nelsen

Nitro Water Sports

 

[james irwin]

HEY BRIAN , THANK YOU , I SEEMED TO HAVE MISSED SOMTHIMG HERE WITH THESE GUYS ? I AM VERY GLADE YOU HAD SOMETHING TO SAY ABOUT THIS PROJECT , NOW THEY HAVE HEARD IT FROM SOMEONE OTHER THAN I . HOW MANY TIMES HAVE I TRIED TO TELL EVERY ONE WHAT A MAJOR UNDERTAKING THIS THING IS ? I WENT WAY BACK AND READ ALL POSTS AND I KNOW OF THREE TIMES I HAVE TRIED TO TELL THEM . HEY YA ALL IF YOU HAVE SOME MONEY YOU WOULD LIKE TO INVEST , ???? LET ME KNOW . AS IT TAKES A BUNDLE , SO . ETHER GO ALONG FOR THE RIDE, OR GO BUY SOMETHING ELSE, WHAT CAN I SAY . AND JERRY WYSE , HIS LITTLE COMMENT ? ITS BULL ---- LIKE THAT , THAT MAKES YOIU WANT TO THROW YOUR HANDS UP AND SAY TO H--- WITH IT ALL .

O WELL YOU HOPE FOR THE BEST OF EVEYONE , AND SOMETIMES IT HAPPENES AND SOMETIME IT DOES NOT .

NOW A SMALL AMOUNT OF FILL IN , MUFFLERS , JIMMY HAS THEM NOW , AND WILL DO SOME PRE TRIAL TESTING AND WILL LET ME KNOW . THE ENGINES HAVE ALL BEEN COMPLETED AND THE ORDER IS IN MY HAND TO BE FAXED NOW . THEY ----SHOULD ----- BE HERE IN ABOUT THE END OF MARCH . SO I HAVE DONE MY PART NOW SO YOU GUYS CAN COTINUE TO RACE . NOW , ? WHAT ARE YOU GOING TO BESIDS SIT BACK AND COMPLAIN ?? ??

 

[Grimracer]

I have a hard time reading James posts because he uses caps all the time. James please do not take this wrong but i re-typed the post and will sumit it now.

I did change the wording a TAD to make it a bit more read able.

Good news on the motors..

Here we go.. remember this is not ment to slash any throats..

Hea Brian,

Thank you, Seams I have missed something with these guys. I am very glad you spoke up and helped clarify the situation with the motors. I value your input. I have stated many times what a huge undertaking developing a motor like this can be. I looked back at the old posts and it looks like three times before I have reiterated what we have said here, this is a huge undertaking. We are taking orders now and if anybody would like to pre-pay we would be happy to take the cash. It takes a lot of money to do this and every penny helps. If you like you are welcome to join in or you might have to substitute a different brand motor for the short term. Jerry Wyse, put a sock in it. ( Im kidding Jerry.. this was a mike Z ad in... )The best we can do is hope for the best and some times things are hard to control.

Now for some good news about our past line of Mufflers: Mr. Jimmy Eddelman is you new muffler making master. He has been doing more testing and production and will keep me posted on his new venture.

More about the motors: The engines have been completed and the order is in my hand. We will be faxing it to the MFG. Soon and the motors should start hitting our shores the end of March. I have done my part so you guys can keep racing. Now what are you going to do? Sit and complain. HAHAHA

Re-wrote and posted by mike z

 

[Jerry Wyss]

Well GEEWiZZ, Just a Little "touchy" I would say. No Worries Mate,,I'm Buildin' 3

Thunder Tiger's for this season , Otta Be Good!

 

[james irwin]

HEY MIKE . AS YOU CAN WELL SEE I DO NOT KNOW HOW TO GET MY FOOT OUT OF MY COTTEN PICKIN MOUTH , ??? I HAVE HAD THIS DOGGON FLUE FOR ABOUT THREE WEEKS NOW AND I FEEL TERABLE , I KNOW I LOOK BAD TOO , HEY EVERY ONE OUT THERE YOU TOO JERRY , I AM SORRY I BLOWED SOME STEAM OFF AT YOU , PLEASE EXCEPET MY APPLOGIES , THANK YOU FOR BEING SO UNDERTSANDING TO AN OL FART O YES MIKE . I DO WANT TO THANK YOU FOR REWRITING THE POST WHEN YOU GET TO BE 72 YRS OLD AND

STILL LOVE A HOBBY AS I DO YOU TRY TO DO ANY THING YOU CAN TO KEEP IT ACTIVE , AGAIN , SORRY ABOUT BLOWING THE STEAM , GOD BLESS ALL

 

[james irwin]

Well GEEWiZZ, Just a Little "touchy" I would say. No Worries Mate,,I'm Buildin' 3Thunder Tiger's for this season , Otta Be Good!

83771[/snapback]

​

HEY JERRY , HOW WOULD YOU LIKE TO BE ABLE TO RUN YOUR TIGERS ON A LOWER UNIT THAT DOES NOT HAVE THE GEARS ???? I WILL LET YOU KNOW WHEN IT IS AVAIABLE , ALL INBOARDS WILL BE ABLE TO USE MY UNIT . HOWS THAT GRAB YOU h34r: h34r: h34r: h34r:

 

[TimD]

Well GEEWiZZ, Just a Little "touchy" I would say. No Worries Mate,,I'm Buildin' 3Thunder Tiger's for this season , Otta Be Good!

83771[/snapback]

​

HEY JERRY , HOW WOULD YOU LIKE TO BE ABLE TO RUN YOUR TIGERS ON A LOWER UNIT THAT DOES NOT HAVE THE GEARS ???? I WILL LET YOU KNOW WHEN IT IS AVAIABLE , ALL INBOARDS WILL BE ABLE TO USE MY UNIT . HOWS THAT GRAB YOU h34r: h34r: h34r: h34r:

83818[/snapback]

​

Hi James,

The gears are the big advantage the TT has in my opinion! They don't run backwards either! The rest of the engine isn't that great :lol: :lol: :lol:

Also, Mike Z is correct in saying your posts are harder to read because they are in capital letters. Would you mind turning off your caps lock when you type your posts please?

Hope you feel better soon! The flu sucks!

Tim.

 

[waterbug]

**** Jim !! It's Me !!! Waterbug SC, "SandLapper", " Butch " The Guy that took your side and got blasted for months.... :huh:

Grim I think Jim just drove a stake through my heart from the back...!!!! Is it bleeding..??

They say the second thing to go is your memory....!! :lol: :lol: We all know what the first is......

Jim I can send you some "CORN LIQUOR" to knock that flu in the butt...!!!

 

[VansRacing]

Well This much I can tell you, he is proceeding with the project. I know this because I just finished 300 complete prop shaft assemblies for him. He still has 300 more on order. I am not sure if many of have have ever dealt with a project like this but it is major hard and major expensive. I have been trying to release my 7.5 outboard engine for three years now. seems there is always something going on to slow the project down. I am very close but that only counts in horse shoes and hand gernades.

Jim is working on his engine and I know he is near completetion. Believe me he is just as frustrated as you are.

Thank You

Brian Nelsen

Nitro Water Sports

83748[/snapback]

​

Hello Brian,

I have a prototype 7.5cc Tunnel I am working on. It has only been raced twice. It was driven by Ron Drake Once in Jackson Tenn at the 2004 National where it set the fastest straight line times, fastest 2 lap oval times and won US-1. Then, it was then raced once in Brandon Fl where it took first place in that competition.

I am doing some additional research with the boat and would like to talk to you about your engine. You can write me at: [email protected]

Hope to hear form you soon.

-Carl,

Van's Racing & Design

 

[waterbug]

Jim

You need to be careful with that flu ...People here in S.C. have been getting neumonia....!!!!

Butch

 

[Nitro20001]

I CORN LIQUOR if i wanted to.

 

[Slideblues]

Hey Jim,

Sitting on tha beach in a Hula skirt and drinking MaiTai's might be a good way to get rid of that Flu!!!! :lol: :lol: :lol:

Aloha, hehehehe

Gene

 

[Jerry Wyss]

HEY MIKE .   AS YOU CAN WELL SEE I DO NOT KNOW HOW TO GET MY FOOT OUT OF MY COTTEN PICKIN MOUTH , ???   I HAVE HAD THIS DOGGON FLUE FOR ABOUT THREE WEEKS NOW AND I FEEL TERABLE ,  I KNOW I LOOK BAD TOO ,   HEY EVERY ONE OUT THERE  YOU TOO JERRY , I AM SORRY I BLOWED SOME STEAM OFF AT YOU ,   PLEASE EXCEPET MY APPLOGIES ,   THANK YOU FOR BEING SO UNDERTSANDING TO AN OL FART    O YES MIKE .    I DO WANT TO THANK YOU FOR REWRITING THE POST   WHEN YOU GET TO BE 72 YRS OLD AND STILL LOVE A HOBBY AS I DO  YOU TRY TO DO ANY THING YOU CAN TO KEEP IT ACTIVE ,   AGAIN , SORRY ABOUT BLOWING THE STEAM ,   GOD BLESS ALL

83816[/snapback]

​

Don't worry about it Jim,,Of All People, I Understand. I've "pulled both Gun's Out"

and had them "Blowup" in my face before :blink:

I wasn't going to run the Tiger's this season, but I have ALOT of parts that I have to use up,,,so what the "H". I'm hopeful with the New Head Button's I'm making,,

seem's to be some improvement there,,but will see soon. Get Well,,QUICKLY :lol:

 

[Brian_Nelsen]

Hello Brian,
I have a prototype 7.5cc Tunnel I am working on. It has only been raced twice. It was driven by Ron Drake Once in Jackson Tenn at the 2004 National where it set the fastest straight line times, fastest 2 lap oval times and won US-1. Then, it was then raced once in Brandon Fl where it took first place in that competition.

I am doing some additional research with the boat and would like to talk to you about your engine. You can write me at: [email protected]

Hope to hear form you soon.

-Carl,

Van's Racing & Design

Carl you have mail

Brian Nelsen

Nitro Water Sports

 

[not2bright]

hey jim is there by chance going to be one of your engines at the puallup show? i would love to see one. B)

 

[Ron Olson]

I have a hard time reading James posts because he uses caps all the time. James please do not take this wrong but i re-typed the post and will sumit it now.
I did change the wording a TAD to make it a bit more readable.

Good news on the motors..

Here we go.. remember this is not ment to slash any throats..

Hea Brian,

Thank you, seems I have missed something with these guys. I am very glad you spoke up and helped clarify the situation with the motors. I value your input.  I have stated many times what a huge undertaking developing a motor like this can be. I looked back at the old posts and it looks like three times before I have reiterated what we have said here, this is a huge undertaking. We are taking orders now and if anybody would like to pre-pay we would be happy to take the cash. It takes a lot of money to do this and every penny helps. If you like you are welcome to join in or you might have to substitute a different brand motor for the short term.  Jerry Wyse, put a sock in it. (   Im kidding Jerry.. this was a Mike Z add-in...    )The best we can do is hope for the best and some times things are hard to control.

Now for some good news about our past line of Mufflers: Mr. Jimmy Eddelman is you new muffler making master. He has been doing more testing and production and will keep me posted on his new venture.

More about the motors: The engines have been completed and the order is in my hand. We will be faxing it to the manufacturer soon. The motors should start hitting our shores the end of March. I have done my part so you guys can keep racing. Now what are you going to do? Sit and complain. HAHAHA

Rewritten and posted by Mike Z.

83767[/snapback]

​

Mike , I corrected your spelling! :lol:

Anyone who has ever tried to do an undertaking even close to what Jim is doing ought to be commended. He is not a big Corporation and this has really had to tap out his savings. He is trying to do things right before it hits the market and doing things right takes a LOT of time and testing.

 

[Grimracer]

I have a hard time reading James posts because he uses caps all the time. James please do not take this wrong but i re-typed the post and will sumit it now.
I did change the wording a TAD to make it a bit more readable.

Good news on the motors..

Here we go.. remember this is not ment to slash any throats..

Hea Brian,

Thank you, seems I have missed something with these guys. I am very glad you spoke up and helped clarify the situation with the motors. I value your input.  I have stated many times what a huge undertaking developing a motor like this can be. I looked back at the old posts and it looks like three times before I have reiterated what we have said here, this is a huge undertaking. We are taking orders now and if anybody would like to pre-pay we would be happy to take the cash. It takes a lot of money to do this and every penny helps. If you like you are welcome to join in or you might have to substitute a different brand motor for the short term.  Jerry Wyse, put a sock in it. (   Im kidding Jerry.. this was a Mike Z add-in...    )The best we can do is hope for the best and some times things are hard to control.

Now for some good news about our past line of Mufflers: Mr. Jimmy Eddelman is you new muffler making master. He has been doing more testing and production and will keep me posted on his new venture.

More about the motors: The engines have been completed and the order is in my hand. We will be faxing it to the manufacturer soon. The motors should start hitting our shores the end of March. I have done my part so you guys can keep racing. Now what are you going to do? Sit and complain. HAHAHA

Rewritten and posted by Mike Z.

83767[/snapback]

​

Mike , I corrected your spelling! :lol:

Anyone who has ever tried to do an undertaking even close to what Jim is doing ought to be commended. He is not a big Corporation and this has really had to tap out his savings. He is trying to do things right before it hits the market and doing things right takes a LOT of time and testing.

83966[/snapback]

​

Thanks Ron..

Friends helping friends... its all good...

Grim