Hull identity

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JamesShields

Well-Known Member
Joined
Mar 23, 2015
Messages
285
I started filling what I thought was gel coat and found this. It is 33” x 13 1/2”
Looking for setup info
 

Attachments

  • 24249A33-A962-488F-BD40-91D010A37A3C.jpeg
    24249A33-A962-488F-BD40-91D010A37A3C.jpeg
    3.6 MB
  • C9E9CEEE-DD56-4A1D-95EB-2E2CEE8196D4.jpeg
    C9E9CEEE-DD56-4A1D-95EB-2E2CEE8196D4.jpeg
    3.3 MB
  • 88707FA5-5651-4224-B701-C197F1BA2C60.jpeg
    88707FA5-5651-4224-B701-C197F1BA2C60.jpeg
    1.9 MB
  • 6B074180-737A-4F3D-8E4C-6498A4CC8156.jpeg
    6B074180-737A-4F3D-8E4C-6498A4CC8156.jpeg
    2.5 MB
  • 50CC6017-DCE0-4C0A-9E8A-51B6ABBDA0A0.jpeg
    50CC6017-DCE0-4C0A-9E8A-51B6ABBDA0A0.jpeg
    2.9 MB
  • 5C04FA6E-AAE0-4FAD-8F7B-077BC0D2EA83.jpeg
    5C04FA6E-AAE0-4FAD-8F7B-077BC0D2EA83.jpeg
    3.8 MB
James, To start just keep it simple.. put on an Octura X448 and have the bottom of the bullet at water level to start.

Set the CG at 27%

Keep the fuel tank as high as you can under the cowl.

Put more servo power then you expect you might need on the steering.

No need to go nuts on the Nitro for now..

Test and tune.. replete! Ya got this!

Grim
 
James, To start just keep it simple.. put on an Octura X448 and have the bottom of the bullet at water level to start.

Set the CG at 27%

Keep the fuel tank as high as you can under the cowl.

Put more servo power then you expect you might need on the steering.

No need to go nuts on the Nitro for now..

Test and tune.. replete! Ya got this!

Grim
What servo would you recommend? I am building a new radio box. I plan on using brass tube for my steering rods
 
James,

Speed.. not an issue.. power AND durability is the key. Let me look in my box of servos. I think I have some 1/5th scale servos and can let one of those go.. (need to check that!)

Grim
 
James,

Speed.. not an issue.. power AND durability is the key. Let me look in my box of servos. I think I have some 1/5th scale servos and can let one of those go.. (need to check that!)

Grim
Grim
I have servos. I was more looking for torque spec. I want to optimize the radio box. I am working on K&B and Nova Rossi 46 setup.
 

Latest posts

Back
Top