Have some pipes for sale

[FloridaScaleBoater]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

 

[Mick J]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

Hey Rick,

If shipping to Perth, Western Australia, 6164 is reasonable then I will take #1, #3, #4 mate.

Let me know what we can come up with

Thanks mate

Johno

 

[hydro rob]

Thanks Georgia,

Payment sent for 1 and 3.

Thanks.

 

[FloridaScaleBoater]

Thanks Georgia,

Payment sent for 1 and 3.

Thanks.

Got you covered Rob,

Thank you. I will get them heading your way on Monday.

 

[FloridaScaleBoater]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

Hey Rick,

If shipping to Perth, Western Australia, 6164 is reasonable then I will take #1, #3, #4 mate.

Let me know what we can come up with

Thanks mate

Johno

Johno, Hydro Rob had first dibs on pipes,, Would you be interested in #2 & #4, @ is the same as pipe 1 only muffled.

Let me know if you are willing to take these 2 pipes & I will get the cost of shipping on Monday.

 

[Mick J]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

Hey Rick,

If shipping to Perth, Western Australia, 6164 is reasonable then I will take #1, #3, #4 mate.

Let me know what we can come up with

Thanks mate

Johno

Johno, Hydro Rob had first dibs on pipes,, Would you be interested in #2 & #4, @ is the same as pipe 1 only muffled.

Let me know if you are willing to take these 2 pipes & I will get the cost of shipping on Monday.

No worries Rick,

Sure I'd be interested in #2 if you wouldn't mind getting some prices on shipping across the pond we can go from there.

No rush mate, whenever you get a chance

Thanks again

Johno

 

[FloridaScaleBoater]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

Hey Rick,

If shipping to Perth, Western Australia, 6164 is reasonable then I will take #1, #3, #4 mate.

Let me know what we can come up with

Thanks mate

Johno

Johno, Hydro Rob had first dibs on pipes,, Would you be interested in #2 & #4, @ is the same as pipe 1 only muffled.

Let me know if you are willing to take these 2 pipes & I will get the cost of shipping on Monday.

No worries Rick,

Sure I'd be interested in #2 if you wouldn't mind getting some prices on shipping across the pond we can go from there.

No rush mate, whenever you get a chance

Thanks again

Johno

Johno;

getting a quick quote offline, looks like it should be $18.00 to $20.00,, So does $25.00 sound fair to make sure I'm covered?

 

[Mick J]

I have a few pipes for sale. To start with, the 3 smaller pipes "hydrorob" has first dibs on them. Lets give him till, say mid afternoon 10/2 to decide if he wants any of them.

#1 is a Macs exhaust 3.5 aero pipe 10" overall length, 6" from inlet to widest point, 4" from widest point to stinger, 1.241" at it's widest point, .395ID stinger.

Sleeved to telescope over CMB 21 header, has pressure fitting $15.00.

#2 is a Macs exhaust 3.5 muffled aero pipe. 12-1/4" overall length, 6" from inlet to widest point, 3-1/2" from widest point to internal stinger, 2-3/4" from int. stinger to muffler outlet, 1.241" at widest point. Sleeved to telescope over CMB 21 header, has pressure fitting $15.00

Both of these pipes were run on a CMB 21 Valvola and developed tremendous RPM. they would probably work great on the 15 to 18 sized engines.

#3 is an unknown brand? 10-1/8" overall length 4-1/2" from inlet to weld seam, 1-1/8" flat power band, 4-5/8" from end of flat band to end of stinger, 1.498" at widest point .341" stinger ID $25.00

#4 is a CMB 90 nitro pipe, 12-1/4" overall length, 6" from inlet to start flat power band, 1-1/8" flat power band, 5-1/2" from end of power band to end of stinger.

2-1/2" stinger legnth, 2.163" at widest point, .430 stinger ID $30.00

All prices are shipped in the lower 48, other locals we'll have to get shipping cost's

If using paypal, it's [email protected]

Thanks for looking

Hey Rick,

If shipping to Perth, Western Australia, 6164 is reasonable then I will take #1, #3, #4 mate.

Let me know what we can come up with

Thanks mate

Johno

Johno, Hydro Rob had first dibs on pipes,, Would you be interested in #2 & #4, @ is the same as pipe 1 only muffled.

Let me know if you are willing to take these 2 pipes & I will get the cost of shipping on Monday.

No worries Rick,

Sure I'd be interested in #2 if you wouldn't mind getting some prices on shipping across the pond we can go from there.

No rush mate, whenever you get a chance

Thanks again

Johno

Johno;

getting a quick quote offline, looks like it should be $18.00 to $20.00,, So does $25.00 sound fair to make sure I'm covered?

Rick, will send you a PM mate

Johno