GREAT NEW ITEM>>>1 Piece 90 Water Fitting>>>Intro Pricing

[Duke Mordja]

Yes Duke, that's correct. I think you have my pp but it's my email [email protected]

Payment Sent.

 

[Bill Brandt]

Got it. Monday holiday. They go out Tuesday.

Thanks Duke!

Bill

 

[Duke Mordja]

Bill,

I received the fittings today. The threads are so short that with the nut and oring suppied, there are no threads left to screw on to water jacket.

Did you send me the ones you took off your web page because of that issue as you posted in another thread? (And sold for $1.75 each) before you started this thread?

Please let me know, or better yet, give me a little insight if I am installing them wrong.

Possibly the wrong nut was sent? I believe in post above that a thin brass nut was to be supplied. The steel nut supplied is pretty thick.

The fittings are great little parts.

Thanks

 

[Bill Brandt]

Bill,

I received the fittings today. The threads are so short that with the nut and oring suppied, there are no threads left to screw on to water jacket.

Did you send me the ones you took off your web page because of that issue as you posted in another thread? (And sold for $1.75 each) before you started this thread?

Please let me know, or better yet, give me a little insight if I am installing them wrong.

Possibly the wrong nut was sent? I believe in post above that a thin brass nut was to be supplied. The steel nut supplied is pretty thick.

The fittings are great little parts.

Thanks

Duke,

The nuts were just add ons more for use if used for a pressure fitting. I bought the thinnest nuts I could find to add in. I put a couple of the nuts on my grinder and thinned them up some more. The O rings were also just added as extra. The fittings work great by themself just adding a little medium strength threadlocker to make them hold position. These are not the same as the ones previously offered. Those were brass with very short threads, these are aluminum with much more threads. I can provide pictures of each if you would like. The offering said thin brass nut and I agree I wish it were thinner. If they aren't meeting your expectation please return and I will refund the purchase or give you credit, your preference. I want customers satisfied all the time.

So far response has been great but I'm running low.

Thanks,

Bill

 

[Duke Mordja]

Thanks Bill.

I will use without the oring an thin out the nut a little with thread lock as you suggest.

Not returning. "The good outweighs the Bad"

Duke

 

[Bill Brandt]

Duke, please also check your pm.

Take Care,

Bill

 

[mark ham]

HOW MANY DO YOU HAVE LEFT?

 

[Bill Brandt]

Mark,

How many do you want? Once stock is depleted they won't show as available on my site.

 

[j whiddon]

Bill,

Could you send me a quote on 12 fittings to 33823?

 

[Bill Brandt]

51.00. 12 x 4 plus 3.00 to [email protected]

Intro special of 4.00 each ends the 1-31

Thanks,

Bill

 

[j whiddon]

payment sent. Thanks

 

[Bill Brandt]

Got it. I'll get em right out. Look for paid invoice in your email.

Thanks

Bill

 

[shoboat]

Bill,

Do you know what the I.D. of the fittings are?

Curious If They Will Work On Another Project?

Mark Sholund

[email protected]

 

[Bill Brandt]

Mark,

My measurement shows;

.88 inch

2.5 mm

3/32

Bill

 

[Ron Zaker Jr]

Thanks for the GREAT service Bill.