• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Gas Cracker Boxes for sale

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

[email protected]

Well-Known Member
Joined
Nov 6, 2002
Messages
4,025
For Sale: Two Cracker boxes one fiberglass, one wood that's been glassed

both are about 75% complete.

The first fiberglass boat is the best quality hull I've seen layed up. The hull was produced in Washington a few years back and cost $450. The weight was distributed to help the boat plane right away. Has a XXL Don Gardner rudder. Trim tabs, rudder and strut are on the boat. Boat comes with a radio box, flex cable and ferrule as well as a fuel tank. Has a prop

Boat has some great drivers made by Fred Deal.

The motor is a brand new super modified Mid-West Zenoah. The pipe is a Bruce Hanson, motor mount is purple anodized

The second boat is from Classic Cracker boxes built from Jerry Dunlaps plans. Boat is a stage three built by Ken Reilly, the retail for that stage before being glassed was $399. If you ask Jerry who Ken is he'll tell you he's a top notch builder who doesn't take short cuts.

Boat comes w/drivers all the hardware, radio box, fuel tank and the other misc parts to build it. Such as rudder, trim tabs, strut.

Motor is also a brand new Mid-West super modified Zenoah and Bruce Hanson pipe.

The complete package has water cooled silencers for the pipes, bearings, water pick ups, reducer bushings, thrust washers, fuel tubing. It looks as if everything but electronics are here to build two brand new boats.

There's easily more than $2,000 of boat stuff here.

I'd like to package it off to one buyer for $1,400 and shipping.

I have a ton of pictures. So please only ask to see them if your really really interested.

e-mail me at [email protected]
 
For Sale: Two Cracker boxes one fiberglass, one wood that's been glassed

both are about 75% complete.

The first fiberglass boat is the best quality hull I've seen layed up. The hull was produced in Washington a few years back and cost $450. The weight was distributed to help the boat plane right away. Has a XXL Don Gardner rudder. Trim tabs, rudder and strut are on the boat. Boat comes with a radio box, flex cable and ferrule as well as a fuel tank. Has a prop

Boat has some great drivers made by Fred Deal.

The motor is a brand new super modified Mid-West Zenoah. The pipe is a Bruce Hanson, motor mount is purple anodized

The second boat is from Classic Cracker boxes built from Jerry Dunlaps plans. Boat is a stage three built by Ken Reilly, the retail for that stage before being glassed was $399. If you ask Jerry who Ken is he'll tell you he's a top notch builder who doesn't take short cuts.

Boat comes w/drivers all the hardware, radio box, fuel tank and the other misc parts to build it. Such as rudder, trim tabs, strut.

Motor is also a brand new Mid-West super modified Zenoah and Bruce Hanson pipe.

The complete package has water cooled silencers for the pipes, bearings, water pick ups, reducer bushings, thrust washers, fuel tubing. It looks as if everything but electronics are here to build two brand new boats.

There's easily more than $2,000 of boat stuff here.

I'd like to package it off to one buyer for $1,400 and shipping.

I have a ton of pictures. So please only ask to see them if your really really interested.

e-mail me at [email protected]
can you send photos of both to [email protected]
 
Last edited by a moderator:

Latest posts

Back
Top