Found Fuel tanks needed

[Ray Sametz]

Fits inside right sponson, built in hopper tank.

 

[Timbo Whalen]

Front

https://www.intlwaters.com/threads/...ld-record-tanks-martin-truex-135-3-mph.69745/

 

[P THOMAS]

this is the size for Stealth front tank

 

[douglong]

Thanks everyone both tanks have been ordered

 

[Anthony Asaro]

I used to make my own tanks from either a pint or quart empty can, what ever would fit in. I would then cut it with a dremel cut off blade to fit the length I needed. While it is apart I would add the pickup and fill brass tubes. Soldered it altogether and was almost cost free. Worked very good with the old Crapshooters I ran.

 

[Roxyflash]

Only problem with using tin is it rusts and the nitro speeds up the process

 

[rctinman]

Only problem with using tin is it rusts and the nitro speeds up the process

Properly cared for tin tanks last a long time, and they don't come apart like stainless. I have tin tanks that are over 8 years old, and going strong.

Steve Ball

 

[dr gary turner]

Properly cared for tin tanks last a long time, and they don't come apart like stainless. I have tin tanks that are over 8 years old, and going strong.

Steve Ball

Absolutely

 

[johnsteltzer]

You got to know how to silver soldier stainless
I have had a few seams come apart but it was do to to small a tip in my iron I have that problem beat and I use surgical stainless tubing and I don’t brag but I build the best tank on the planet I will put my tank up against anybody and my customer service is A1 ask anyone I put my heart and soul in these tanks and I have built some crazy shape tanks for people all around this planet so if you want best ask for it and I will build what ever your mind can come up with so everyone have a great racing season thanks for your support

 

[Joe Warren]

Doug I have a Brand New Walt Barney Stainless Steel STEALTH 45 Tank if You Need One? $50 plus shipping.

 

[douglong]

Doug I have a Brand New Walt Barney Stainless Steel STEALTH 45 Tank if You Need One? $50 plus shipping.

I'll take it.

 

[Joe Warren]

Coming to you......

 

[dr gary turner]

You got to know how to silver soldier stainless
I have had a few seams come apart but it was do to to small a tip in my iron I have that problem beat and I use surgical stainless tubing and I don’t brag but I build the best tank on the planet I will put my tank up against anybody and my customer service is A1 ask anyone I put my heart and soul in these tanks and I have built some crazy shape tanks for people all around this planet so if you want best ask for it and I will build what ever your mind can come up with so everyone have a great racing season thanks for your support

 

[Grimracer]

John. your tanks look great.

When i was building tanks there were a few things that I tested and worked great.

I tested stainless lines and was not happy with how they worked.. part of this was how the tubing held.

I would anneal hard brass tubing,. polish and bend. Tubing in the tanks were very good.. (my sport 40 tank is now 13 years old)

I would buy a roll of tin from K+S (one a year or so)

Moby **** (**** Jones, RIP) helped me qualify the baffle in the tanks we built. (worked good)..

Tanks were all drawn in Autocad.. (even every custom tank)

Tin and Hard Brass.. 34 bucks a tank.. I sold MANY MANY tanks in the 4/5 or so years I did that. It got to the point I had hired one of our mechanical guys at the baby factory to build one day a week.. while I built the other days. One tank would take about 35-40 min start to finish. It was 6 days a week.. LOL.. When I sold Power Surge I kept the tank part of the business just in case I wanted to do it again.. BUT... there are many fine tanks to choose from now.

Grim

 

[johnsteltzer]

That’s great maybe some of those other tank builders could build some tanks for me so I can see what they got and see how good they are