FS HITEC HS625MG (NEW)

[K.R.Joye]

HITEC HS625MG

Std size servo with Big Power & Metal Gears brand new never used, missing box

http://www.servocity.com/html/hs-625mg_ultra_speed.html

SPECS:

Control System: +Pulse Width Control 1500usec Neutral

Required Pulse: 3-5 Volt Peak to Peak Square Wave

Operating Voltage: 4.8-6.0 Volts

Operating Temperature Range: -20 to +60 Degree C

Operating Speed (4.8V): 0.16sec/60 degrees at no load

Operating Speed (6.0V): 0.13sec/60 degrees at no load

Stall Torque (4.8V): 76.37 oz/in. (5.5kg.cm)

Stall Torque (6.0V): 94.43 oz/in. (6.8kg.cm)

Operating Angle: 45 Deg. one side pulse traveling 400usec

360 Modifiable: Yes

Direction: Clockwise/Pulse Traveling 1500 to 1900usec

Current Drain (4.8V): 8.8mA/idle and 400mA no load operating

Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

Dead Band Width: 8usec

Motor Type: 3 Pole Ferrite

Potentiometer Drive: Indirect Drive

Bearing Type: Dual Ball Bearing

Gear Type: 3 Metal Gears and 1 Resin Metal Gear

Connector Wire Length: 11.81" (300mm)

Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)

Weight: 1.94oz. (55.2g)

$32.00 Shipped CONUS