John H. Fiegel
Well-Known Member
- Joined
- Oct 16, 2011
- Messages
- 172
For Sale (2) Made for MHZ by Scorpion motors,
Both are brand new, never used,
5035 Marine series outrunners, 760kv, 5800 continuous watts, 8100 max watts, 150 amps up to 10s. They have water passages machined in them for cooling.
Both come in original packaging with all parts, fittings, stickers.
Special version of Scorpion MHZ-HK-5035 with 760 Upm per volt, specially for boats.
Engine has specially large ballbearings, 10 mm shaft and integrated water cooling.
Hole spacing: 4 x M4 = 40mm
Specifications:
Outside Diameter 61.0mm (2.4")
Stator Diameter 50.0mm (1.96")
Stator Thickness 35.0mm (1.37")
Magnet Poles 8
Motor Kv 760 KV RPM / Volt
Max Continuous Power 5800 Watts
Max Continuous Current 150 Amps
Weight 729 Grams (25.73 oz)
Shaft Diameter 9.98mm (0.393")
Body Length 75.0mm (2.91")
Overall Shaft Length 100.7mm (3,97 in)
Max Lipo Cell 8 ~ 10 S
Maximal peak power 8100 Watts
Motor Timing: 5° max. 7,5
Retail $385 USD ea + SHIPPING to USA.
http://www.mhz-powerboats.com/catego...-5035-760.html
Selling for $365 ea SHIPPED OR
$725 for BOTH motors only, SHIPPED, Lower 48 only and overseas pays actual cost.
I have the custom aluminum motor mount to fit these as well.
A few of the pictures of the motor mount shows the prototype mount, front cross member with extra water passages.
The new cross member has no extra water passages, due to the fact that the motors have their own,
so I eliminated them for strength and made the cross member solid.
The two close up pictures from the side show the cross member without the water passages.
$125 for the mount, SHIPPED Lower 48 only and overseas pays actual cost.
Both are brand new, never used,
5035 Marine series outrunners, 760kv, 5800 continuous watts, 8100 max watts, 150 amps up to 10s. They have water passages machined in them for cooling.
Both come in original packaging with all parts, fittings, stickers.
Special version of Scorpion MHZ-HK-5035 with 760 Upm per volt, specially for boats.
Engine has specially large ballbearings, 10 mm shaft and integrated water cooling.
Hole spacing: 4 x M4 = 40mm
Specifications:
Outside Diameter 61.0mm (2.4")
Stator Diameter 50.0mm (1.96")
Stator Thickness 35.0mm (1.37")
Magnet Poles 8
Motor Kv 760 KV RPM / Volt
Max Continuous Power 5800 Watts
Max Continuous Current 150 Amps
Weight 729 Grams (25.73 oz)
Shaft Diameter 9.98mm (0.393")
Body Length 75.0mm (2.91")
Overall Shaft Length 100.7mm (3,97 in)
Max Lipo Cell 8 ~ 10 S
Maximal peak power 8100 Watts
Motor Timing: 5° max. 7,5
Retail $385 USD ea + SHIPPING to USA.
http://www.mhz-powerboats.com/catego...-5035-760.html
Selling for $365 ea SHIPPED OR
$725 for BOTH motors only, SHIPPED, Lower 48 only and overseas pays actual cost.
I have the custom aluminum motor mount to fit these as well.
A few of the pictures of the motor mount shows the prototype mount, front cross member with extra water passages.
The new cross member has no extra water passages, due to the fact that the motors have their own,
so I eliminated them for strength and made the cross member solid.
The two close up pictures from the side show the cross member without the water passages.
$125 for the mount, SHIPPED Lower 48 only and overseas pays actual cost.
