First Mono

[Glenn Gates]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

 

[TERMINATOR]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

new to monos myself but mine is a proven setup and i am running a 80 and a fat belly black cmb pipe at 11 inches, x462 prop as well, i can send you a extra pipe with the motor glenn if you want to give one a try..lmk

tk

 

[ALLAN YUEN]

Hi Glenn I have used 6 props S&B: SD-65, OCTX560,X462,M-90,X465 and Prather 265SS I dont need them because my SD3 60/80 with CMB67/80 Sold last 3yrs ago Ask to sell $70.00 Shipped Are you interesting ? let me know cheers Allan

 

[Glenn Gates]

Hi Glenn I have used 6 props S&B: SD-65, OCTX560,X462,M-90,X465 and Prather 265SS I dont need them because my SD3 60/80 with CMB67/80 Sold last 3yrs ago Ask to sell $70.00 Shipped Are you interesting ? let me know cheers Allan

Allan, Thanks for the offer-but they may be too large for this altitude(4200 ft.). Think the others here are running X460's. I'll find out what they're using.

Thanks again,

Glenn

 

[Glenn Gates]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

new to monos myself but mine is a proven setup and i am running a 80 and a fat belly black cmb pipe at 11 inches, x462 prop as well, i can send you a extra pipe with the motor glenn if you want to give one a try..lmk

tk

Terry, Forgot to mention in first post-got two other pipes I can try also- a 90 size Irwin and a 67/90 Cooper on the way from Martin L..I may not have time to try all the pipes I have before the weather turns to crap here. Please send the motor to Steve Woods-gonna have him go thru a bunch of motors this winter. I'll let him know it's comming.

Thanks,

Glenn

 

[TERMINATOR]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

new to monos myself but mine is a proven setup and i am running a 80 and a fat belly black cmb pipe at 11 inches, x462 prop as well, i can send you a extra pipe with the motor glenn if you want to give one a try..lmk

tk

Terry, Forgot to mention in first post-got two other pipes I can try also- a 90 size Irwin and a 67/90 Cooper on the way from Martin L..I may not have time to try all the pipes I have before the weather turns to crap here. Please send the motor to Steve Woods-gonna have him go thru a bunch of motors this winter. I'll let him know it's comming.

Thanks,

Glenn

roger that glenn it is headed to harrison st ..thanks

tk

 

[mark voorhies]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

new to monos myself but mine is a proven setup and i am running a 80 and a fat belly black cmb pipe at 11 inches, x462 prop as well, i can send you a extra pipe with the motor glenn if you want to give one a try..lmk

tk

Terry, Forgot to mention in first post-got two other pipes I can try also- a 90 size Irwin and a 67/90 Cooper on the way from Martin L..I may not have time to try all the pipes I have before the weather turns to crap here. Please send the motor to Steve Woods-gonna have him go thru a bunch of motors this winter. I'll let him know it's comming.

Thanks,

Glenn

Glenn,

First, your sending the motor to the right person, second, try the Cooper QHP pipe @ 11.5" with X457/3 or X460/3 and CMB fat belly pipe

about the same and shorten lenght on pipes as to performance. Not sure about 90 Irwin pipe , never tried one. I'm @ 1000' elev., your quite a

bit higher, not sure there.

 

[Glenn Gates]

Hi All, Just put together my first mono hull: 40" A.C. with a CMB .80. Looking for some tips on pipe length and prop selection. Got two pipes- Macs 1369 and 1382. Was going to start out with a X455/3. I run @ 4200 ft. elevation. Like to hear your suggestions.

Thanks,

Glenn

new to monos myself but mine is a proven setup and i am running a 80 and a fat belly black cmb pipe at 11 inches, x462 prop as well, i can send you a extra pipe with the motor glenn if you want to give one a try..lmk

tk

Terry, Forgot to mention in first post-got two other pipes I can try also- a 90 size Irwin and a 67/90 Cooper on the way from Martin L..I may not have time to try all the pipes I have before the weather turns to crap here. Please send the motor to Steve Woods-gonna have him go thru a bunch of motors this winter. I'll let him know it's comming.

Thanks,

Glenn

Glenn,

First, your sending the motor to the right person, second, try the Cooper QHP pipe @ 11.5" with X457/3 or X460/3 and CMB fat belly pipe

about the same and shorten lenght on pipes as to performance. Not sure about 90 Irwin pipe , never tried one. I'm @ 1000' elev., your quite a

bit higher, not sure there.

Thanks Terry and Mark, Decided to try the Macs 13cc super quiet pipe first-just seems to fit the best-telecopes nicley over the AB header and fits the cutout in the boat best and the clamp is already made. Sits @ 11.5" as-is may take 1/4" inch off the pipe so I can shorten to 11.25" if nec. I've got X 400 series 3 blade props from 54mm-60mm.

Appreciate your comments!!!

Glenn