EZ Collet Remover Tool $25.00 Plus $5.00 for shipping.
Gas engine flex shaft collets can be a pain to remove because they have a tapered fit that can lock on to your engines crank shaft. This tool removes the collet from your engine easily and safely with out any damage to your crank shaft or collet. Just remove the set screw from the middle of the collet and twist the remover tool on to it. The collet will come off easily with just a few turns.
The tool is dual use and is threaded on the opposite end so you can use it for a piston stop. Taking apart your engine is a lot faster and easier with this combo tool. The EZ Collet Remover is made out of steel for heavy duty use and will last for years. This tool works with most Zenoah, Sikk, Quickdraw, and other clone motors that use an Aeromarine style collet.
Squish Band Tool and 1" Dial Indicator $35.00 Plus $6.00 for shipping.
If you want to use your own indicator you can buy the adapter alone for $25.00 plus $5.00 for shipping. It will fit any indicator with a 3/8" shaft and custom sizes are available if needed.
This tool alows you to measure the squish band of your engine very accurately so you can custom tune the compression by changing the thickness of the cylinder gasket.
The Squish Band tool comes with a 1" dial indicator and custom made adapter to fit most RC engines with a 10 mm spark plug. Custom sizes are available if needed. You can also up grade the indicator to a digital unit for $20.00 more. This is a good way to go if you want a gauge that reads in metric.
You can save a few bucks if you buy both tools together and the total would be $65.00 for both shipped in the 48 states.
Payment can be made via Pay Pal under [email protected]
Questions??? Just ask. I'm not on this forum much so the best way to get a hold of me is [email protected]
Thanks! Dale P.
Gas engine flex shaft collets can be a pain to remove because they have a tapered fit that can lock on to your engines crank shaft. This tool removes the collet from your engine easily and safely with out any damage to your crank shaft or collet. Just remove the set screw from the middle of the collet and twist the remover tool on to it. The collet will come off easily with just a few turns.
The tool is dual use and is threaded on the opposite end so you can use it for a piston stop. Taking apart your engine is a lot faster and easier with this combo tool. The EZ Collet Remover is made out of steel for heavy duty use and will last for years. This tool works with most Zenoah, Sikk, Quickdraw, and other clone motors that use an Aeromarine style collet.
Squish Band Tool and 1" Dial Indicator $35.00 Plus $6.00 for shipping.
If you want to use your own indicator you can buy the adapter alone for $25.00 plus $5.00 for shipping. It will fit any indicator with a 3/8" shaft and custom sizes are available if needed.
This tool alows you to measure the squish band of your engine very accurately so you can custom tune the compression by changing the thickness of the cylinder gasket.
The Squish Band tool comes with a 1" dial indicator and custom made adapter to fit most RC engines with a 10 mm spark plug. Custom sizes are available if needed. You can also up grade the indicator to a digital unit for $20.00 more. This is a good way to go if you want a gauge that reads in metric.
You can save a few bucks if you buy both tools together and the total would be $65.00 for both shipped in the 48 states.
Payment can be made via Pay Pal under [email protected]
Questions??? Just ask. I'm not on this forum much so the best way to get a hold of me is [email protected]
Thanks! Dale P.
