Engine Bearings

[Mike Betke]

I have plenty of bearings in stock for all sets listed on the first post.

 

[raceready]

Mike, how about 14x25, 8x6 and 7x19x6,3 mm if that helps
thanks Chris

 

[Mike Betke]

Mike, how about 14x25, 8x6 and 7x19x6,3 mm if that helps
thanks Chris

Chris,
I do not have any of these. NR used a lot of non standard size bearings which makes it difficult to find any replacement bearings from reputable bearing manufacturers. You could try Gabe at stump fab, novarossi direct or Boca bearing.

Thanks

 

[FloridaScaleBoater]

Chris,
I do not have any of these. NR used a lot of non standard size bearings which makes it difficult to find any replacement bearings from reputable bearing manufacturers. You could try Gabe at stump fab, novarossi direct or Boca bearing.

Thanks

I have had good luck with Boca Bearings for my Nova's
They do have different grade levels available.

 

[raceready]

I have had good luck with Boca Bearings for my Nova's
They do have different grade levels available.

By any chance you have the part #s?

 

[FloridaScaleBoater]

By any chance you have the part #s?

Pretty sure this is the set I used
ENK-005HP
P075858

Not all 21 NovaRossi use the same bearings.
I found the bearings I needed by searching by size.
If you search by engine, there are A BUNCH of different models..

 

[raceready]

Pretty sure this is the set I used
ENK-005HP
P075858

Not all 21 NovaRossi use the same bearings.
I found the bearings I needed by searching by size.
If you search by engine, there are A BUNCH of different models..

Thanks I'll take a look.