Thanks. Still need to get it dialed in but yeah, I'm very happy with the boat right off the bench.
Thank you. I wanted to do something different and liked the snake skin design so I tried out hydro dipping for the first time. Very easy to do and inexpensive compared to airbrushing.
Thanks Andy. I've been running your rudders on my gas sports and riggers for quite some time now as I've found they perform the best compared to others. So if you got any laying around let me know! Could use some spares, single and double pick ups!
That was a stock ABC 2719/2 38 bar. However, the boat seemed a bit flighty even with the fin adjusted to dig in a bit and a slightly negative strut setting. I'm gonna try a prop with around a 15 degree rake and see if that settles it down. If not enough, I'll move the fuel bag into the nose instead of behind the engine.
Thanks for the compliment Brad. I bought the diy kit from https://www.mydipkit.com/shop/ They have tons of cool designs and the kit comes complete with everything you need.
I looked up his name under members and checked some recent posts. I found this post from June of 2021 :
Good eye Todd. Yes, it's the same 1/2" offset pipe I had you do for my Whiplash. Never had an issue with the springs clearing the deck but your suggestion would certainly give it a little more room.
Boat looks good, Scott!
