- Joined
- Jul 7, 2018
- Messages
- 552
I had a cracked 1oz tank and found out the clear container lids are the same plastic . If you use a hot air station with a small tip at around 327c is what mine was set at clean area with alcohol ,cut small 1/4 x 3 inch strips and lay them on it while heating the plastic making sure to keep slight positive pressure in the tank with a hose in your mouth it all goes clear then cools back to white and seals perfectly. its as strong as the original tank it seems. I just wanted to post it in case someone else ever has a tank needing repaired .
