Collets, Flex Hex, etc.

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dannyual767

Well-Known Member
Joined
May 27, 2004
Messages
633
Okay, I know this is a strange request.

I need to buy a new flex cable collet for one of my K&B engines and the little HPI 15 engine I recently bought from ebay. Do you have a picture of your Octura Flex Hex or your Marine Specialties Super Flywheel Nut Assembly (that's what they call it!)

I have an AM collet on my Zenoah engine. It has the replaceable insert. I really don't like that. I've got several different collets on my engines that either I bought in the past or that came with the engines when I bought them off of ebay. Unfortunately, none are identified by brand. I know which ones I prefer so I'm trying to buy another one. Please don't flame me for being anal on this :unsure: . Thanks.
 
For the K&B I can't help you ,only with European supplyers. (MTL and Gundert)

For a picture of flex-collets see # O-51/52/53/55 > on this link

For the HPI.15 .... Ask around for a deceased Dremel ... cut-of below the stator and machine the rest to fit the engine and use a 3.2mm / 0.125 or 1/8Inch flex.

I did so on a Super-Tiger pullstart 0.12 .
 
Last edited by a moderator:
Thanks, Hendric. I think that I'm going to go with Octura collets. They appear to be pretty inexpensive and I think that Octura is the last one I bought a couple of years ago. I really like it.
 


Write your reply...
Back
Top