Parts Wanted CMB67 Carb?

[P THOMAS]

Is there a replacement carb for the 67 CMB?
I have a black carb that broke off the fuel nipple.
I need a CMB black carb or a Speedmaster not sure they make one.

 

[RaceMechaniX]

I have a new silver one with low speed needle.

 

[P THOMAS]

Thanks Tyler that brass nipple just fell out on my carb. I have another motor with black carb so I look for a black one to match up.

 

[Tommy Levescy]

Thanks Tyler that brass nipple just fell out on my carb. I have another motor with black carb so I look for a black one to match up.

Give me a sec I'll go take a look Im pretty sure I have a few

 

[Tommy Levescy]

Checked my stock at this house. All I have are the old original green head ones, and one of the silver one like Tyler showed. I may have one at my other house. I'll go by there tomorrow and see. We haven't moved everything from there yet and my other cmb .67 parts box is over there.

 

[Roxyflash]

Can it be repaired?I maybe able to repair it .

 

[P THOMAS]

Checked my stock at this house. All I have are the old original green head ones, and one of the silver one like Tyler showed. I may have one at my other house. I'll go by there tomorrow and see. We haven't moved everything from there yet and my other cmb .67 parts box is over there.

I have two greenhead 67 one had a black carb and other silver

 

[P THOMAS]

Can it be repaired?I maybe able to repair it .

Im sure it can fix just wanted matching carbs I setting up a twin

 

[Roxyflash]

Ok being on a twin would like it a perfect match

 

[Tom Foley]

Tap it for one of the CMBwater fittings and drill I D size to suit. Red loctite it in .

 

[Danny King]

Cut the spray bar housing off at the hole For the fitting and drill and tap then put the new fitting in so it is no longer a 90. Very easy to do and better fueling

 

[SayMikey]

Buy the silver one and you will always put the same motor on the same side!

 

[Doug Shepherd]

If Phil doesn’t want the Silver carb? I will buy Thanks Doug

 

[P THOMAS]

Another option I see is finding two .505 Mac Carbs. Any one have some??
I want to keep both throttle arms in the center

 

[Tom Foley]

Not to hard to modify those carbs to be rotary carbs like old OPS carbs
.

 

[Joe Warren]

Is there a replacement carb for the 67 CMB?
I have a silver carb that broke off the fuel nipple.
I need a CMB black carb or a Speedmaster not sure they make one.

Speedmaster makes Carbs for .67/.80 CMB All diff sizes.

 

[P THOMAS]

Speedmaster makes Carbs for .67/.80 CMB All diff sizes.

Yea I like to get the Speedmaster carbs for the boat

 

[Tommy Levescy]

After further searching it looks like I don't have any of the black carbs.

 

[P THOMAS]

Is there a replacement carb for the 67 CMB?
I have a black carb that broke off the fuel nipple.
I need a CMB black carb or a Speedmaster not sure they make one.

I plan to fix the black carbs i have problem is the fuel nipple has come loose, one fell off last summer then the second one was loose, last race the Timex died every heat with that motor in there probably that loose nipple making it run lean.

 

[P THOMAS]

Cut the spray bar housing off at the hole For the fitting and drill and tap then put the new fitting in so it is no longer a 90. Very easy to do and better fueling

Danny there enough metal to take threads if cut off at the hole? So the fitting is going straight in right ? sounds good.