Parts Wanted CMB 67 HR Buttons

[Timbo Whalen]

G'mornin', and Merry Christmas....

In need of 2 CMB 67 HR head buttons....no pocking from detonation, no mods, etc. Also need head shims for same.

These will be for a pair of MAC 67's we're doing for a friend....I believe the MAC 67 bore is a bit smaller than CMB's....so, we can make any small adjustments in the lathe.

Also, could someone please provide the external dimensions of the 67 HR sleeve.... particularly the barrel OD, top flange OD and thickness, length of sleeve top of flange>bottom edge....think ya can see where we're going with this....anyone out there with an old 67 HR sleeve they can lend me would be great....will pay for all expediting costs, and buy ya a beer....only need for a day.

Thanks!
Tim

 

[Ronnie King]

Tim,

These measurements are from a new Anotoly set that I have.

Barrell OD = 29.99mm
Top Flange OD = 34.05mm
Top Flange Thickness = 3.02mm
Sleeve OAL = 44.25

Let me know if you need anything additional on this.


Regards,

Ronnie King
NAMBA #1223

 

[Timbo Whalen]

Tim,

These measurements are from a new Anotoly set that I have.

Barrell OD = 29.99mm
Top Flange OD = 34.05mm
Top Flange Thickness = 3.02mm
Sleeve OAL = 44.25

Let me know if you need anything additional on this.


Regards,

Ronnie King
NAMBA #1223

Thank you much, Ronnie!....Merry Christmas!

 

[Timbo Whalen]

Tim,

These measurements are from a new Anotoly set that I have.

Barrell OD = 29.99mm
Top Flange OD = 34.05mm
Top Flange Thickness = 3.02mm
Sleeve OAL = 44.25

Let me know if you need anything additional on this.


Regards,

Ronnie King
NAMBA #1223

One other thing, is it fairly painless dealing with Hobby Miracle?....reasonable delivery times, shipping costs?....last I looked, the Anatoly Karpov piston/liner kit inventory was quite low....think I just saw some V5 and 91/101 RS pieces.....was hoping for some 21 Beta EVO and 45 RS RVO pieces.
I know Anatoly's circumstances over there are not the best.

Thanks!

 

[Buckshot]

One other thing, is it fairly painless dealing with Hobby Miracle?....reasonable delivery times, shipping costs?....last I looked, the Anatoly Karpov piston/liner kit inventory was quite low....think I just saw some V5 and 91/101 RS pieces.....was hoping for some 21 Beta EVO and 45 RS RVO pieces.
I know Anatoly's circumstances over there are not the best.

Thanks!

I have not dealt with Hobby Miracles so can’t comment on them. Anatoly had to move…he has a new shop set up but is slow to get rolling. Obtaining materials is difficult.

 

[Timbo Whalen]

I have not dealt with Hobby Miracles so can’t comment on them. Anatoly had to move…he has a new shop set up but is slow to get rolling. Obtaining materials is difficult.

Thanks, Buck