Car engine conversion mounts?

[Alan Elzer]

I have one and it has cracked just like you said,but great machine work and ideaView attachment 299633View attachment 299634

That's where they break. On mine I've changed how engine mounts to the lower unit which gives it more strength..

 

[topfuel443]

There are several of these out there now, I’ve made a few over the years. Not a new idea by any means, and very simple. Pretty much any engine can be made fit the same setup.

 

[Brandon Atwell]

Gabes mount works flawless for the CMB conversion setups, been working on it here recently and these engines have alot of power!

 

[Shane Bastick]

There are several of these out there now, I’ve made a few over the years. Not a new idea by any means, and very simple. Pretty much any engine can be made fit the same setup. View attachment 300045View attachment 300046View attachment 300047View attachment 300048View attachment 300049

Hi James
do you have a O/B mount available for the current CMB 45 engines


thanks

Shane

 

[Alan Elzer]

Shane if he doesn't I have them ready to ship

 

[Shane Bastick]

Shane if he doesn't I have them ready to ship

Hi Alan,

will your mount fit the 45RS EVO gold head and onto a K&B lower

thanks

Shane

 

[Alan Elzer]

Hi Alan,

will your mount fit the 45RS EVO gold head and onto a K&B lower

thanks

Shane

Yes any of the evo 45 engines, I just need to know which one you have

 

[Mike Trasente]

I have a 45 rs evo cmb with os lower unit will it fit and do make one for a cmb 21 beta

 

[Alan Elzer]

No won't won't on OS lower besides flex shaft to small. These made to adapt to lawless 45/67 lower or K & B 45 lower

 

[Alan Elzer]

The 21 beta would be to long & stick to far up, beleave me I've look at it they good motors

 

[LawlessMan]

So

Fred do you have any pictures of your set up?
Thanks
Greg

Sorry for all delays in this project. Here are some pix of the finished unit. I will put an ad in the for sale section so anyone that wants one can call and order. Not shown in the pix are the driver adapter for the motor and the mounting hardware.

 

[Greg Rowe]

Very cool
Thank you
Greg

 

[Greg Rowe]

What is the price?
Do you make one that adapts to an OS lower

 

[Joey Jones]

Do you make one that adapts to an OS lower

From my talks with Mr. Fred If I understand it right, it'll mate up with the K&B, Lawless or O.S. Lower.

-Joey

 

[Greg Rowe]

From my talks with Mr. Fred If I understand it right, it'll mate up with the K&B, Lawless or O.S. Lower.

-Joey

Thanks

 

[LawlessMan]

Joey is correct. You can mount the unit on a K&B or OS 3.5 drive and also on a lawless (minus the motor mount plate of the drive.)

 

[LawlessMan]

I just found this item on Amazon. A car pipe with 180 degree header and hardware for under $20.00. Search on Amazon for this "Dilwe Car Exhaust Pipe"> It is almost identical to the one Rod used on his prototype.