beginner question

[Michael Villeneuve]

Just starting out in the hobby.
I'd like to know a ballpark of what to use as far as props go and what to look for
-first boat is a atlas van lines kit with an ops .65 currently has a prather 250 on it
-second boat is .20 Hydro (not sure what hull) with an OS .20 unknow prop on it

Thanks alot

 

[Tom Foley]

Try an X - 455 on the Atlas and a 1440 , X440 on the 20 Hydro to get going .

 

[Grimracer]

For the Atlas.. look for a prop that does not provide much lift.. (Like an X prop) on the 20 hydro.. you would want a lifting prop.. like a 1445..

Have fun

Grim

 

[Walt Barney]

Just starting out in the hobby.
I'd like to know a ballpark of what to use as far as props go and what to look for
-first boat is a atlas van lines kit with an ops .65 currently has a prather 250 on it
-second boat is .20 Hydro (not sure what hull) with an OS .20 unknow prop on it

Thanks alot

If you need any props I may have them , They need to be sharpened and balanced, if you need this done call Props 4 U Mark Sholund
Walt Barney

 

[Mark Anderson]

The 250 will get you going on the Atlas. X460 or 255 are good user friendly props in that application as well. Have you run the 20 boat with the prop that is on it? As stated above 1445 is a great place to start.

Mark

 

[FloridaScaleBoater]

Just starting out in the hobby.
I'd like to know a ballpark of what to use as far as props go and what to look for
-first boat is a atlas van lines kit with an ops .65 currently has a prather 250 on it
-second boat is .20 Hydro (not sure what hull) with an OS .20 unknow prop on it

Thanks alot

What make hull is the Atlas? What kind of weight ready to run are we working with?
Is it a hard shaft or flex shaft setup?
From experience from back in the day, OPS 67's wouldn't turn much prop.
If I recall X455/3 and X457/2 were the "go to" props back then

 

[Michael Villeneuve]

Thanks a lot for all the info guys.
I haven't tried any of the boats yet. As far as weight goes, i will have to check I'm very unsure. I believe it's the Dumas kit flex shaft.

Mike

 

[shoboat]

Micheal,
X-455, X-457, for the Dumas Atlas Van Lines boat, and the 1445 is a great choice to start with on the 21-Hydro.

Thanks,

Mark Sholund
241-590-3023
Props-4-U

 

[Michael Villeneuve]

Micheal,
X-455, X-457, for the Dumas Atlas Van Lines boat, and the 1445 is a great choice to start with on the 21-Hydro.

Thanks,

Mark Sholund
241-590-3023
Props-4-U

Perfect thank you.
Can you ship props to Canada by any chance?

 

[shoboat]

Micheal,

I send them all over the world, Canada is no problem.
All are in stock as well.

Thanks,

Mark Sholund

 

[Bill Gibson]

EXCELLENT PROPS!

 

[Beau Parsons]

You can’t go wrong with props from Mark Sholund props 4 u