Boats Wanted Any .67 tunnels out there?

[Wasted wages]

Anyone producing tunnel hulls to run a
.67 or .82 on anymore?

Anyone have a nice old one they want to part with?

If not, I guess I’ll just build an outboard rigger…
Want to play with some outboards again..

 

[Mike Hughes]

Frank
You need to get ahold of a XT-460 or hornet. I bet Gabe has a bunch layining around. He is a tunnel freak.
Mike

 

[Greg Rowe]

HTB 36 to small??

 

[Wasted wages]

HTB 36 to small??

Don’t know anything about them…

 

[Greg Rowe]

HTB

 

[rumrunner]

Hornet would be your best you can find or dragon will be best you can buy, ran a hornet for years with a Mac 84 ,now run dragon with nr 67 or nr 91 nothing will touch them .
Sorry one more boat pro glass from Martin.

 

[Wasted wages]

Are there any manufacturers selling
new hulls ? Or just used boats at this point ?

 

[Mike Hughes]

I think Stumpfab is selling the XT460 and Vision. That is about it that I know in that range.
Mike

 

[Wasted wages]

Thanks Mike..
Doesn’t look like the XT-460 is available on the website.. just the Vision 3.5 and 7.5 …

Sent Gabe an email..

 

[the german]

Frank
I have a Vision 7.5 with a NR 45 and a Salisbury pipe. This tunnel hauls the mail ......... just saying.

Alex

 

[Wasted wages]

Frank
I have a Vision 7.5 with a NR 45 and a Salisbury pipe. This tunnel hauls the mail ......... just saying.

Alex

What’s the length of your hull ?
Picture?

 

[Alan Elzer]

HTB

That looks like a 340 ?

 

[Greg Rowe]

That looks like a 340 ?

No it's 36" long

 

[the german]

What’s the length of your hull ?
Picture?

The hull is 53 1/2” by 13 1/2”
Here are some pics
Before someone ask …… the front plate is to change weights . It is an aluminum base plate 115 grams (4.05 ounces) with tungsten alloy weights between 70 and 100 grams ( 2.46 to 3.52 ounces) .

Alex

 

[Wasted wages]

@the german

The hull is 53 1/2 ??
Are you sure?
I emailed with James at stumpfab this morning and he said that the XT460 and Vision 7.5 are both 35” … I’m confused…


Quote:
( “Both the XT460 and Vision are around 35” in length. It will be after the summer before any new crafts will be laid up. “

James Clegg, Owner
Stump Fabrication LLC
404-661-7025 )

 

[the german]

@the german

The hull is 53 1/2 ??
Are you sure?
I emailed with James at stumpfab this morning and he said that the XT460 and Vision 7.5 are both 35” … I’m confused…


Quote:
( “Both the XT460 and Vision are around 35” in length. It will be after the summer before any new crafts will be laid up. “

James Clegg, Owner
Stump Fabrication LLC
404-661-7025 )

Frank
The boat lengths is 35 1/2 ….. sorry just mixed the number

 

[Wasted wages]

After some thought and looking around, along with suggestions from others…. I’ve decided to go with, and build a PTI NX-400…

Don’t know anything about them, but wanted to go with a longer hull to better match a .67 motor, rather than trying to bolt it onto a shorter .45 hull and have to add weight..

There is a production wait time, but let’s see where this goes. It’s been a minute since I have built a frame up hull from a kit..

Thank you all for your input…

 

[Alan Elzer]

Paul has recently lost his wife to a long struggle of cancer so give him some time to reply.
His kits are great, I built the one for a 45 mod setup about 4 yrs ago. Everything was a snug fit so easy to hold it's self while glueing.

 

[Mike Hughes]

I have one of his P LTD tunnels. The boat handles well. I liked the rocker better on these hulls compared to the G30. Better cornering. You will like them.
Mike

 

[Bryan haley]

Paul has recently lost his wife to a long struggle of cancer so give him some time to reply.
His kits are great, I built the one for a 45 mod setup about 4 yrs ago. Everything was a snug fit so easy to hold it's self while glueing.

Spoke to him a week ago he is in the process of moving into a new shop . Got his nx320 nice looking boat