topsecretboats
Well-Known Member
- Joined
- Apr 5, 2006
- Messages
- 88
I invested around $2000.00 in this Small Scale Anodizing system and never found the time to set it up and start anodizing and it looks like I may never get around to it. So I'm going to let it go.
$1000.00 for every thing (plus shipping and 3% if using Paypal)
Paypal= [email protected]
Provides a durable anodized surface - which can easily be dyed.
Simple to operate - Predictable consistent results
Low Current Density means – Inexpensive power source
Low Current Density means – No heat buildup in the tank
VERY dilute chemical requirement – Environmentally friendly
No fumes – SAFER in confined areas
Fully Expandable - Kits can be made bigger by obtaining larger plastic containers
Conforms to Mil Spec A 8625 F
Read How To Use This Product (PDF - 1.9MB) (These instructions are included in the manual)
Anodize a polished, chrome like finish on Aluminum
Color Aluminum With A Myriad of colors and patterns
Automotive Parts
Paint Ball Guns
Model Boat parts
Model Helicopter
Aluminum Beads
Micro Sprint Car
Engine Parts
Paintball Gun
Kit Contains:
6 x 6 gal tanks with locking rings and lids (12" diam x 14" deep)
5 tanks for the Anodizing & Dying Process, 1 tank for Anodize Stripping
4 x 300 watt Ceramic Heaters
1 x Thermostat
2 x 200 Watt Glass Heaters
1 x Rinsing Sprayer
1 pack Mist Balls
1 x 4oz Mist Suppressant – treats 48 gals of Anodizing Solution
1 x 1lb Anodizing Sealant – makes 8 gallons
1 x 2lb SP Degreaser – makes 4 gallons
2 x 1 qt De-oxidizer – makes 4.5 gallons
2 x 8" x 8" GP Plates
1 x Agitator Pump
6 x Aluminum Strips (1 for tank bar, 5 for testing)
2 x 1lb Anodize & Chrome Stripper - Makes 6 Gal
1 x Color Wheel
The Plating Manual
1 gallon Battery Acid
Power Supply Cost me $800.00
Small amount of electrical wire to make connections
Anodizing Dyes
Mask It Masking Agent
Low Temp Anodizing Sealant
$1000.00 for every thing (plus shipping and 3% if using Paypal)
Paypal= [email protected]
Provides a durable anodized surface - which can easily be dyed.
Simple to operate - Predictable consistent results
Low Current Density means – Inexpensive power source
Low Current Density means – No heat buildup in the tank
VERY dilute chemical requirement – Environmentally friendly
No fumes – SAFER in confined areas
Fully Expandable - Kits can be made bigger by obtaining larger plastic containers
Conforms to Mil Spec A 8625 F
Read How To Use This Product (PDF - 1.9MB) (These instructions are included in the manual)
Anodize a polished, chrome like finish on Aluminum
Color Aluminum With A Myriad of colors and patterns
Automotive Parts
Paint Ball Guns
Model Boat parts
Model Helicopter
Aluminum Beads
Micro Sprint Car
Engine Parts
Paintball Gun
Kit Contains:
6 x 6 gal tanks with locking rings and lids (12" diam x 14" deep)
5 tanks for the Anodizing & Dying Process, 1 tank for Anodize Stripping
4 x 300 watt Ceramic Heaters
1 x Thermostat
2 x 200 Watt Glass Heaters
1 x Rinsing Sprayer
1 pack Mist Balls
1 x 4oz Mist Suppressant – treats 48 gals of Anodizing Solution
1 x 1lb Anodizing Sealant – makes 8 gallons
1 x 2lb SP Degreaser – makes 4 gallons
2 x 1 qt De-oxidizer – makes 4.5 gallons
2 x 8" x 8" GP Plates
1 x Agitator Pump
6 x Aluminum Strips (1 for tank bar, 5 for testing)
2 x 1lb Anodize & Chrome Stripper - Makes 6 Gal
1 x Color Wheel
The Plating Manual
1 gallon Battery Acid
Power Supply Cost me $800.00
Small amount of electrical wire to make connections
Anodizing Dyes
Mask It Masking Agent
Low Temp Anodizing Sealant