• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Aeromarine Sprint Cat set up for racing

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

izitbrokeyet?

Well-Known Member
Joined
Apr 5, 2003
Messages
1,908
up for sale is a 36”ARR Aeromarine Sprintcat with many extras. The auction includes everything shown. 1 complete AM sprintcat minus the receiver and transmitter. The Radio Box is setup with one High speed-high torque servo for steering and one High Torque/High speed for throttle and one standard servo for the needle. The 3rd channel needle is a course /precision needle and is a necessity. It comes with a flat 2300mah 6v NIMH battery pack installed. The radio box is Airtight when the top is sealed with clear silicone. You will not be able to run this boat without a 3 ch radio. The motor is modified in the following ways: the sleeve has been cleaned up/reshaped and the exhaust and intake and boost have been raised .015” using a sleeve shim. The motor is set up with a velocity stack/venturi, drum rotor (not disk) and Prather exhaust throttle. The Headbutton has had the combustion chamber increased using a Double-bubble shape and the headbutton has been decked flat and the basic clearance is etched into the top of the headbutton. The piston has been skirted. The strut has needle-bearings installed and all the running gear is in perfect condition (always lubed with Lubriplate). I’ll include one modified prop to the new owner based on what conditions it will be run in. This motor has only had about 1 ½ gallons through it since rebuild. The auction also includes one unused/uncut painted cowl (if you want to change motors) 2 new piston & sleeves, 2 new con-rods, 1 used piston and sleeve (still OK) 1 new set of K&B bearings, 1 new set of Bocca bearings, new circlips, new engine bolts, and rubber gasket for rear plate. There may be some other little stuff in there like wristpins and circlips. This is a FAST boat that turns like it’s on rails. This boat was made for the express reason of dominating lane 1. check out this clip taken yesterday http://members.cox.net/bulifant/pass1.WMV This is not an “E-bay special” This is not one of Roosted/ Headrc’s or Toad’s garbage scowls. This is one of my personal boats and I stand behind my stuff even after it’s left my hands. Please don’t hesitate to contact me with any questions.
 
I'll let it all go for $850 including shipping. or $800 picked up here in Va Beach will include stand. LOL....that way the new owner will know where I live (I call that good business incentive) ;D
 
there's a guy who's been doing RC trucks for a long time and wants to try a boat, i sent him a message about your boat, i think he'll come on here and take a look within a few days. bring it to the race on sunday, people will be ALOT more inclined to buy something they can take home that day [hehe, i call that good reason to come to the race incentive]

Joe
 
Joe,

I have a class I’m attending Monday morning in Boston, so I’m flying out Sunday afternoon from Norfolk. I can bring the boat by Indian River High Sunday around Lunch or early afternoon so he can see/check out the boat and everything that comes with it. I don’t think I’ll have enough time to hang out and run any boats.

Let me know.

KB
 
kevin,

the guy i told about your boat is NOT in ODMBA, he's just someone on a different forum who's looking for a boat. it still might be worth your time to bring it by and see if anyone wants it, but i dont know if anyone's looking for a boat in the club. bummer you cant come by and burn some nitro for a while. guess i'll just have to wait 'till next time to beat you! :) lol....you'd actually probably whip me in a race, especially if you were using that cat.

Joe
 

Latest posts

Back
Top