Props Wanted 443/2

[Stephen Roberge]

Anyone have a good 443/2, preferably balanced with no nicks in the blades?
Thanks

 

[Mike Hughes]

No such blade. You can cut down a 445/2 to make one.

 

[Stephen Roberge]

Just going by what Zipp Kits has listed. I need one for a .21 hydro. Any thoughts?

 

[Wasted wages]

No such blade. You can cut down a 445/2 to make one.

Apparently there is !

 

[Mike Hughes]

I stand corrected. I am just so use to the Octura numbers.
Mike

 

[shoboat]

Stephen,
What kind of 21-Hydro do you have?
Is it a production kit boat or something
that someone made up? Lots of questions.
What is the weight of the boat, motor being
used, fuel ️ %, what tuned pipe on the motor?
Any pictures of your boat? Lots of options for
a 21-Hydro.

Thanks,

Mark Sholund

 

[Mark Anderson]

I have a couple. Not for sale, But they seem to be in stock at zip kits. Way small for a .21 hydro though

 

[Stephen Roberge]

Stephen,
What kind of 21-Hydro do you have?
Is it a production kit boat or something
that someone made up? Lots of questions.
What is the weight of the boat, motor being
used, fuel ️ %, what tuned pipe on the motor?
Any pictures of your boat? Lots of options for
a 21-Hydro.

Thanks,

Mark Sholund

Hi Mark,

Sorry I didn’t see this sooner. Jason Pomerleau who’s a local up here in district 11 makes the kits. It’s a replica of a full size Grand Prix. He suggested that prop I’m looking for. I know Joe has a copy of them but I’m looking for one that’s balanced and sharpened. I’m putting a CMB in it. So if you have a different idea, please let me know.

 

[Tommy Levescy]

Hi Mark,

Sorry I didn’t see this sooner. Jason Pomerleau who’s a local up here in district 11 makes the kits. It’s a replica of a full size Grand Prix. He suggested that prop I’m looking for. I know Joe has a copy of them but I’m looking for one that’s balanced and sharpened. I’m putting a CMB in it. So if you have a different idea, please let me know.

Oh it's a sport hydro not a outrigger. Here's a few options:
Raw:
https://www.offshoreelectrics.com/proddetail.php?prod=oct-x442https://www.offshoreelectrics.com/proddetail.php?prod=oct-m440https://www.offshoreelectrics.com/proddetail.php?prod=tfl-5b11x44
Predone: Octura x442 Sharpened & Balanced | Offshore Electrics
https://www.offshoreelectrics.com/proddetail.php?prod=cnc-4214250https://www.offshoreelectrics.com/proddetail.php?prod=cnc-4314250https://www.offshoreelectrics.com/proddetail.php?prod=cnc-4216-D

 

[Jonathan DeMaria]

TFL sells that 443 prop

 

[shoboat]

Stephen,
One word of caution about copies, they usually
don’t work as well as the original.
You may want to try an ABC 1714, 1614 or 1514.
Much better casting quality with many more pitch
and diameter options. Also, if it is like our Sport 20
Hydros here in the United States you may need a
little less diameter like the 1600 or 1500 series
propellers. Still have not seen any pictures?

Thanks,

Mark Sholund

 

[Stephen Roberge]

Stephen,
One word of caution about copies, they usually
don’t work as well as the original.
You may want to try an ABC 1714, 1614 or 1514.
Much better casting quality with many more pitch
and diameter options. Also, if it is like our Sport 20
Hydros here in the United States you may need a
little less diameter like the 1600 or 1500 series
propellers. Still have not seen any pictures?

Thanks,

Mark Sholund

Mark, I’m still building the hull. Here’s where it’s at currently.

 

[shoboat]

Stephen,

I would start a 1514-19*-38% or 1514-17*-45% first.
It will depend how deep the sponsons are in the air trap.
Also, it will depend a lot on how light it runs on the water
and the weight distribution on the front sponsons.

Thanks For Reading,

Mark Sholund

 

[FloridaScaleBoater]

Mark, I’m still building the hull. Here’s where it’s at currently.

Is this a scratch build?
Or a Lazer cut kit?

 

[Stephen Roberge]

Stephen,

I would start a 1514-19*-38% or 1514-17*-45% first.
It will depend how deep the sponsons are in the air trap.
Also, it will depend a lot on how light it runs on the water
and the weight distribution on the front sponsons.

Thanks For Reading,

Mark Sholund

Mark, thanks, I’ll get some measurements and send them to you.
Steve

 

[Stephen Roberge]

Is this a scratch build?
Or a Lazer cut kit?

It’s a laser cut kit by a fellow District 11 member.

 

[Stephen Roberge]

Stephen,

I would start a 1514-19*-38% or 1514-17*-45% first.
It will depend how deep the sponsons are in the air trap.
Also, it will depend a lot on how light it runs on the water
and the weight distribution on the front sponsons.

Thanks For Reading,

Mark Sholund

Here’s where the sponsons meet the hull. It’s 1”

 

[FloridaScaleBoater]

It’s a laser cut kit by a fellow District 11 member.

Any contact info?
Price of a kit?

 

[Stephen Roberge]

Any contact info?
Price of a kit?

Jason Pomerleau. Here’s his number. 603-674-2067

 

[FloridaScaleBoater]

Jason Pomerleau. Here’s his number. 603-674-2067

Thank you,
What is the length of the hull?