3rd channel os remote needle wtb.

[anthony420]

I,m looking to set my boat up with one. Any one have everything i need?

 

[shawdaddy]

Anthony, contact Don Ferrette for one of his bases, They are small,compact and are a nice piece of work. The first link is for the base and the second is for the OS needle you will need. Hope this helps, Ryon

http://www.jackrabbitracing.com/needlebase.htm

http://www3.towerhobbies.com/cgi-bin/wti00...LXCN51&P=SM

 

[Topfuel666]

Anthony, contact Don Ferrette for one of his bases, They are small,compact and are a nice piece of work. The first link is for the base and the second is for the OS needle you will need. Hope this helps, Ryon
http://www.jackrabbitracing.com/needlebase.htmhttp://www.jackrabbitracing.com/needlebase.htm

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCN51&P=SMhttp://www3.towerhobbies.com/cgi-bin/wti00...LXCN51&P=SM

IMO this is one of the best setups to use. Very compact and the needle has a low profile in the hull.

Bill

 

[waltr]

GREAT SETUP!!!

2nd to none

I probably have and use more of Dons bases than most people have boats. That's the only one I'll use. Especially in riggers. You don't end up with the out line coming out the bottom. It also ends up usually using less fuel line and keeps the engine compartment neat and tidy. The OS inflight needle is also top notch! Very precise setups.

Don's away right now and will be back next week,but he does check in here from time to time, so if you need a base in a hurry, I can always send you a base and get it replaced from him when he gets back.

There are 2 sizes.21-45 and 67 on up.

Good luck on whichever one you choose.