3rd Channel needle

[JUSTINROGERS]

What are my options for 3rd Channel needle???? Looking for something small for 20 Hydro if possible add a link

Thanks

Justin

 

[Al Hobbs]

A/A Fine Needle, $31.00, comes as a simple kit for you to put together.

Or, you can get one that John Otto or Roger Hooks Sr. has put together, ready to run.

Al Hobbs

 

[Mike Hughes]

https://www.novarossi.us/collections/all-items-excluding-engines/products/needle-valves-remote-adjustable?variant=986414787

Ron has 4 to choose from. Nova, KRE, BVM, and another which I think is champion. Plus you have the Don Ferette base but not on Rons site.

 

[Roger Lee Hooks Sr]

What are my options for 3rd Channel needle???? Looking for something small for 20 Hydro if possible add a link

Thanks

Justin

http://double-aceracingproducts.com/catalog/product_info.php?cPath=4&products_id=83

 

[JUSTINROGERS]

Awesome. Thanks guy's

 

[Don Ferrette]

Uses OS #71703009 remote 3rd channel needle (not included). Left or right side mounting (right shown) $25 plus shipping

 

[Mike Hallam]

I have Don's base in all my boats. Very compact. Never had an issue.

 

[Terry Keeley]

I'm gonna give one of these a try in my new SAW boat, I like the flexibility of the banjo fittings.

https://www.worldchampionproducts.com/en/marine/91-vs99001.html

 

[David Murany]

I'm gonna give one of these a try in my new SAW boat, I like the flexibility of the banjo fittings.

https://www.worldchampionproducts.com/en/marine/91-vs99001.html

Terry,

Those work well. We have quite a few in our boats.

 

[Mike Culhane]

I only run the Ferrette's. Small, light weight and simple. I like the adjustability of the banjos but looks like more places to potentially leak. JMO!

 

[Terry Keeley]

I'm gonna give one of these a try in my new SAW boat, I like the flexibility of the banjo fittings.

https://www.worldchampionproducts.com/en/marine/91-vs99001.html

Terry,

Those work well. We have quite a few in our boats.

Good to know, thanks. Looks like I'm gonna havta open it up a bit for the SAW boat, doesn't flow enough as is.

 

[shoboat]

Boaters,

On a big bore motor the fuel doctor type design is another great option.

Flow is never a problem with these type when you start to pull these new

ABC 2727's.

Thanks For Reading,

Mark Sholund

 

[Stephan Peterson]

Mike Hallam I did not think your Heath Kit radio had a 3rd channel

 

[Don Ferrette]

I only run the Ferrette's. Small, light weight and simple. I like the adjustability of the banjos but looks like more places to potentially leak. JMO!

The bases I sell have been used on everything from the little .12s to mega big block record trials motors.

 

[Terry Keeley]

I'm gonna give one of these a try in my new SAW boat, I like the flexibility of the banjo fittings.

https://www.worldchampionproducts.com/en/marine/91-vs99001.html

Update: It wouldn't flow enough for my SAW boat (11ish on my old school propane unit) so I drilled two more holes per banjo fitting. Would be enough for a big block if you used the straight fitting in one position.

 

[Danny King]

Good to know terry.

For me the Ferrette is the choice. The easiest to fit in tight places and the OS needle is great.

 

[john v]

I have always used john otto mix control, never a problem

 

[JUSTINROGERS]

Have and update. I got the Champion base with the two banjo fittings and the .12-.21 needle doesn't work. With the needle bottomed out and the needle base bottomed out you still get fuel flow and way to much at that. Got home and put the .45-101 needle in it and I can now get no fuel flow so time to finish the 40 hydro and will test the needle again when I go to break in the 40.

 

[Terry Keeley]

Have and update. I got the Champion base with the two banjo fittings and the .12-.21 needle doesn't work. With the needle bottomed out and the needle base bottomed out you still get fuel flow and way to much at that. Got home and put the .45-101 needle in it and I can now get no fuel flow so time to finish the 40 hydro and will test the needle again when I go to break in the 40.

If you use the long tapered OS needle (12 -21 as you call it) it won't seat in the straight fitting, you havta use one of the smaller diameter banjo fittings.

 

[JUSTINROGERS]

I am using both banjo fittings