Parts Wanted .21 Outboard Conversion Kit

[Ron Drake]

Looking for a .21 Outboard Conversion Kit or a .21 Outboard Crankshaft.

Ron Drake
[email protected]
(813) 523-7073

 

[Ron Drake]

Hard to believe that no one has a conversion kit!!!!!

 

[SayMikey]

Try Mike Ball

 

[Davidkrienke]

https://zipptest.com/product/3-5-car-engine-adapter/ Here is the car motor to outboard adapter by Rod Geraghty .I am unsure if this would work for you but it is hard to find a reverse crank and pto for engines these days.

 

[longballlumber]

Take a look at these Ron.

https://www.intlwaters.com/threads/2x-nova-rossi-ob-conversion-kits.86887/#post-857472

 

[Alan Elzer]

Looking for a .21 Outboard Conversion Kit or a .21 Outboard Crankshaft.

Ron Drake
[email protected]
(813) 523-7073

Might have one or complete motor

 

[Kris Flynn]

I have a new lights crank and also a modded Rody Roem crank (both suit 14mm crank Nova/Top motors) I might part with for the right money...I also have the Rody Roem PTO shaft (no housing)

 

[Ron Drake]

I have a new lights crank and also a modded Rody Roem crank (both suit 14mm crank Nova/Top motors) I might part with for the right money...I also have the Rody Roem PTO shaft (no housing)

Yes Kris I am interested and would love to know more.

 

[Kris Flynn]

Here is the modded lights crank and also the Techno Power crank from Rodys original outboards...not the VS outboards he did more recently.
These Technopower cranks fit novarossi motors. Biggest difference is that they have a 9mm center hole, while the lights came standard at 10mm. This lights has been bored out to 10.40mm.

Not sure on what they are worth...I think the lights has very high timing ground into it, the technopower is still very conservative.

PTO shaft shown still in packet also

 

[Carl Van Houten]

I may have a couple of my "QUICKY" flywheels.

 

[Ron Drake]

Here is the modded lights crank and also the Techno Power crank from Rodys original outboards...not the VS outboards he did more recently.
These Technopower cranks fit novarossi motors. Biggest difference is that they have a 9mm center hole, while the lights came standard at 10mm. This lights has been bored out to 10.40mm.

Not sure on what they are worth...I think the lights has very high timing ground into it, the technopower is still very conservative.

PTO shaft shown still in packet also

Kris what would you want for the Techno Power Crank and the PTO Shaft?
Thanks
Ron

 

[Ron Drake]

I may have a couple of my "QUICKY" flywheels.

Carl,
I would love to have one of your flywheels, I will text you for information sir.