anthony_marquart
Well-Known Member
- Joined
- Nov 4, 2003
- Messages
- 3,745
I still have the engine mnt. I think it may have been given to me, if you need it let me know and we'll work it out.
Lower price,.. $150 for a .12 rigger stuff... I need to move it before I change my mind.
1. .12 rigger of my design,.. runs as well as any .12 I've seen or better. It's a about 2.5 years old,.. it's got time on it but it's very well built. Could last forever really.. Here are the details
1. Rossi .12, same as a pixy, TZ.18 carb on it. This engine has time on it too. Last time I ran it I though the pinch had gone away. WHen I went to take it apart I found a loose head bolt. So it will run pretty well.. Not new at all but still can be used. this is the extra motor.
1 OS TZ.12 with a K&B black carb. Sleeve is shimmed 0.030 and the head button is turned down 0.030. This engine is new. I have run 2 tanks through on the beach with the mix so rich it would hardly stay running. I went to run it at the lake and I sucked up the launch and dunked it,.. then my glow starter died.. I lubed it and haven't started it since.
Quarles .12 pipe, Sholund 1440 that is pretty beat up, a S/B V937 and X637, Solinger strut and Zipp rudder. The servos are good, high torque mini on rudder and regular mini on throttle. Both work fine. C/F radio box lid.
2 sets of sponsons of different design. Both work real well. Also a set of sponsons that will fit a FF.12 rigger.
I'll take $150 for it all. (or best offer) + some shipping cost.
I also have a CMB RS.21. I bought this engine off the forum here. This motor has fresh bearings, everything looks very good EXCEPT THE P/L. This P/L is junk. Can be a parts motor or Stu Barr has P/L for $117 I think. I would like $40 for this motor. I have a new motor mount that I'll add for $10.
Everything is is exactly as described and WILL refund money if things are shipped back to me as I shipped them.. No need though.. Just wanted to post that.
I'll add pics now if I can..
Lower price,.. $150 for a .12 rigger stuff... I need to move it before I change my mind.
1. .12 rigger of my design,.. runs as well as any .12 I've seen or better. It's a about 2.5 years old,.. it's got time on it but it's very well built. Could last forever really.. Here are the details
1. Rossi .12, same as a pixy, TZ.18 carb on it. This engine has time on it too. Last time I ran it I though the pinch had gone away. WHen I went to take it apart I found a loose head bolt. So it will run pretty well.. Not new at all but still can be used. this is the extra motor.
1 OS TZ.12 with a K&B black carb. Sleeve is shimmed 0.030 and the head button is turned down 0.030. This engine is new. I have run 2 tanks through on the beach with the mix so rich it would hardly stay running. I went to run it at the lake and I sucked up the launch and dunked it,.. then my glow starter died.. I lubed it and haven't started it since.
Quarles .12 pipe, Sholund 1440 that is pretty beat up, a S/B V937 and X637, Solinger strut and Zipp rudder. The servos are good, high torque mini on rudder and regular mini on throttle. Both work fine. C/F radio box lid.
2 sets of sponsons of different design. Both work real well. Also a set of sponsons that will fit a FF.12 rigger.
I'll take $150 for it all. (or best offer) + some shipping cost.
I also have a CMB RS.21. I bought this engine off the forum here. This motor has fresh bearings, everything looks very good EXCEPT THE P/L. This P/L is junk. Can be a parts motor or Stu Barr has P/L for $117 I think. I would like $40 for this motor. I have a new motor mount that I'll add for $10.
Everything is is exactly as described and WILL refund money if things are shipped back to me as I shipped them.. No need though.. Just wanted to post that.
I'll add pics now if I can..
Last edited by a moderator:
Used to be on a quick little boat of mine.
