1/8th carbon angle

[P THOMAS]

Anyone have some of this 1" angle cost $68 for 4 foot. I just want about 2 foot.

Anyone want to share an order?

http://dragonplate.com/ecart/product.asp?pID=6110&cID=258

 

[Mike Cathey]

It's easy to make Phil.1/8th inch is usually 11-12 layers of 6oz. cf cloth. Just get a couple of pieces of alum angle at home depot, wax and coat with your mold release, West it and clamp it. Let cure in a warm room for 24 hours. You might have an hour into it. You can make a 4' piece for about $30. Not counting the alum angle

 

[P THOMAS]

It's easy to make Phil.1/8th inch is usually 11-12 layers of 6oz. cf cloth. Just get a couple of pieces of alum angle at home depot, wax and coat with your mold release, West it and clamp it. Let cure in a warm room for 24 hours. You might have an hour into it. You can make a 4' piece for about $30. Not counting the alum angle

yes I have made some thinner angles like that thanks.