1/12 scale electric Pro Boat Elam for sale

[FEK]

Most of the decals were bad, so I removed them and my local graphics shop was going to print new ones, but I never had them done. Upgraded prop, radio, transmitter and ESC with programmer. There was an issue I had to fix and don't know if you have a clear picture (last one) of the fix. Problem was a tight fit of the batteries that were causing a small stress crack on both sides of tunnel, but never caused a leak. I imbedded glass fabric with epoxy over those two spots too stop and further issues and later found some batteries that fit better, end of problem. No scratches, dings or chips! Asking $650 plus shipping that has been running about $75. Questions or more pics, just ask. Thanks

 

[Grimracer]

I dont think you have enough posts to sell..

 

[Bradley Maglinger]

Please read the forsale rules. You are 47 post away, and you need to list in the forsale section.

 

[Bill Schaare]

As a new member myself, I personally don't understand the 50 posts before you can sell rule. What purpose does that serve? If you've ponied up the funds to become a member, why shouldn't you be able to utilize the benefits of the forum: including being able to sell items immediately? That rule doesn't seem to apply if you want to purchase something from another member. While I have gained a lot of valuable information from the site, most of what I've learned could have been had skating along as a nonmember. Not saying that's right, but that's the way the system is set up; and some will take advantage of that. You don't see this kind of restriction on other rc based websites like RC Group, Flying Giants, RC Scale Builder or RC Universe; and some of those are free sites. Just my $.02-Bill

 

[FEK]

As a new member myself, I personally don't understand the 50 posts before you can sell rule. What purpose does that serve? If you've ponied up the funds to become a member, why shouldn't you be able to utilize the benefits of the forum: including being able to sell items immediately? That rule doesn't seem to apply if you want to purchase something from another member. While I have gained a lot of valuable information from the site, most of what I've learned could have been had skating along as a nonmember. Not saying that's right, but that's the way the system is set up; and some will take advantage of that. You don't see this kind of restriction on other rc based websites like RC Group, Flying Giants, RC Scale Builder or RC Universe; and some of those are free sites. Just my $.02-Bill

Thanks for the 2 cents. I'm told now I'm in the wrong place to sell and can't find the right place. I've been on and off this sight sense 2012.

 

[FEK]

I dont think you have enough posts to sell..

Oh well, I'll take them somewhere else to sell. You might know a dear friend of mine, Bob Zola.

 

[Grimracer]

And or.. stick around.. post more.. teach us what you know.. everybody's input helps us all become better boaters.. after 50 posts (its just a IW rule here) sell all you want.

Selling is nice benefit of your commitment to the boaters here. A number of years ago I know we had a terrible time with new seller and that did not work well for out small community. (some bad trades were made)

It was after that time that a post count was put on new members regarding selling.. (its not a huge hurtle.. just a bump in the road)

Grim

 

[Grimracer]

Also FEK.. if you do not sigh up using your real name your real name must be put in your signature.

that too is a rule..

Thanks for reading

Grim

 

[Don Ferrette]

Somehow this person got thru without using real name, that is not allowed due to some bad apples in the past. It is also the reason for the selling rules of 3 years member or 50 posts, people got ripped off by "new" members.

FEK you first and last name are required as display name, those who were grandfathered in with nicknames before rule took effect still had to add their real name in signature line. I will be more than happy to make the correction for you if you either post your real name here or send to me in a p/m.