Search results

It would seem to me that to balance a prop you would need to have a matching drive dog and balance them together, with set screws too? Can anyone explain? It has been a while since I needed to introduce a new prop and balance one but it seems to me I saw a difference on the balancer last time...

Do you guys use some type of oil on the wrist pin and crank journal when you reassemble before firing up? Same with the bearings? I hope this doesn't open a can of worms but I don't think WD40 will cut it for this application and nitro fuel is corrosive. I don't have quote after-run oil but I...

Thanks for the great knowledge, feedback and encouragement. Hopefully this summer I will get all 3 in the water. The EP is ready to go now when I get a battery. In a few weeks I will have a skiff running and can take them to a lake and be able to retrieve them safely without driving all the...

So will these help a tunnel hull handle better and replace using a turn fin? I noticed the PB Stiletto EP has them and no turn fin but I need to get a nitro boat running. I have a few older turn-fin style hulls that I am in the restoration phase so now would be the time. One is a Prather...

Hi All, Is there an advantage to the pull-pull wheel compared to just 2 hard rods, with a collar in the middle, going from a double arm on the servo to each side of the steering arm on the engine? I am building 3 tunnels from scratch a 3.5, 7.5 and 11 cc and would appreciate feedback before I...

It may be a long shot but I was reading the owners guide for the K&B 7.5 OB and it recommends the long reach glow plug P/N 7311for 25% not the 1L ; and then another article about glow plugs http://www.fubarhill.com/GLOW.htm and especially http://www.scootworks.com/rdrc/gloplugs.html that kind-of...