Search results

There must be some simmilar tapes available on your side of the pond also from lets say mcmaster. I will google.

Hi Mark, Have you experienced the same things I did with the 17 deg rake prop - as in massive torque roll? (when I tested it the left sponson was high in the air, needed to put in left rudder to somewhat keep the sponson down) Found any "solution" to that? /Niklas

I think its this one, it says its 0.5 mm thick but I think its 0.7 mm when I measured it. Note, when using it you only need strips of it. If one would cover the complete surfaces you would not be able to remove the ride-pads or ski without destroying the parts...

Of course, every one has their own ideas and can do whatever they want of course as its a freebie. If you stay away from the foam based tapes, its a really good system that is a quite nice feature if you ask me. Its good (I think) to be able to change/adjust the ski and ride-pads and when they...

Looks good. Looks like you glued the ski and ride pads solid tho...

Novarossi (not Rossi) 15 deg - #40904:

Here's a little push for the pipe and 180 deg hydro manifold Ive been using also: http://www.ne-stuff.net/2016/03/hipex-mp1-21-parabolic-hydro-pipe-and.html

Note, when we tested it in "P-Limited" spec, the boat, esc and batteries was the same as when we tested it in full P spec so to speak. The reason we tested the smaller motors was to see if we wanted to go that route in our first FE outrigger class in Sweden. So we did some basic testing to see...

I'll check. Note, so far we've only used the 3.5 props we have in stock so to speak. Ive got no "FE specific" prop as of yet. Need to charge the laptop where I have the Castle logger info. Give me 30 minutes until it lights up. FE-4SL P-Limited tests: SSS 3660-2700KV: 50x69 prop with 3.21 cup...

Don't know when I will have the extra weeks of time to finalize that though...

Hi Bob, sorry but Im not the one to suggest any optimized props for that set-up I think. When we did the testing of the KEP's FE proto's we did test with a couple of SSS 3660 motors but the performance was not "super good". One was around 2300KV and the other 2700KV. None of them had any power...

I hope to be able to make a list of props within a couple of weeks. Have a few friends that need props also (FE and nitro). For myself I like the KV to be on the higher end so one dont need to go too far up regarding pitch (and cup) etc.

KEP's FE-4S P-Open Freebie Drawings just published. http://www.intlwaters.com/index.php?showtopic=68738 http://www.ne-stuff.net/2016/02/keps-fe-4s-p-open-freebie.html

Just published the KEP's FE-4S P-Open Freebie Drawings. Download. Build it. Have Fun. http://www.ne-stuff.net/2016/02/keps-fe-4s-p-open-freebie.html

Been using 6S LiPo's to run my 603 and 650 Sullivan starters for 4 years now. Its enough with 3300-4000 mAh to run a 3 day event for me. Note, Sullivan updated the switch unit in these a couple of years ago (more silver in them I think) to withstand the LiPo glitches/sparks that eat them up...

Thumbs Up! Btw, I've had good progress in finalizing the FE-4S Full-P freebie drawings today. Fingers crossed that it will be done by tomorrow. /Niklas

Correct. Ive been swamped with work and im just back from a week of skiing. I will start finalizing the KEP's FE-4S (P-open) drawings quite soon, but it will take a couple of weeks more though.

Cool. Looking good.

Thumbs up.

Like.