Greg Ruggles
Active Member
- Joined
- Nov 20, 2024
- Messages
- 25
50" Signtler?
- Thread starter Greg Ruggles
- Start date
Help Support Intlwaters:
Greg Ruggles
Active Member
- Joined
- Nov 20, 2024
- Messages
- 25
Correction. It's a sightler 50". Should it be a surface drive or subsurface drive?
- Joined
- Oct 10, 2007
- Messages
- 1,144
Very old boat, maybe from the 80s
Heard they were good boats in there day
Someone on the site probably is still running one
Heard they were good boats in there day
Someone on the site probably is still running one
- Joined
- Oct 6, 2019
- Messages
- 1,393
Greg never heard of the boat but most monos these days are surface drive
- Joined
- Nov 26, 2012
- Messages
- 2,362
They were good boats and ran good. Most were set up sub surface. I ran mine surface drive. Definitely worth running.
Greg Ruggles
Active Member
- Joined
- Nov 20, 2024
- Messages
- 25
I switched my Dumas 377, 40" from sub surface to a stinger drive. I think it improves the performance.
Greg Ruggles
Active Member
- Joined
- Nov 20, 2024
- Messages
- 25
Danny, I have the opportunity to get this boat for free, however it needs a lot of body/hull work. I've read that using a surface drive the boat gets squirrelly at high speeds. I plan on putting a Picco 90 in the boats. What are your thoughts?
- Joined
- Nov 26, 2012
- Messages
- 2,362
I’ve seen both work just fine.
Just have fun and be open to making changes. There is not one way to do most things.
Will Gallagher
Well-Known Member
- Joined
- Nov 29, 2003
- Messages
- 470
Neil Sightler built very competitive hulls in the late 70's. The quality of his glass work was second to none.. The Hull's had a molded engine mount / radio box that was super cool. I understand that Neil passed away last september..
I have a new unmolested 50" hull that I am saving for a future Gas (CMB 27) build..
Like Danny said, restore it and have fun! It's a cool boat for sure.
I have a new unmolested 50" hull that I am saving for a future Gas (CMB 27) build..
Like Danny said, restore it and have fun! It's a cool boat for sure.
- Joined
- Jan 20, 2019
- Messages
- 1,224
I have had a few of them, great boat back in the day. Back then in the 80’s and 90’s most were set up subsurface. No one was building monos surface drive when that hull was originally built. If I were going to build one today it would be surface drive with 4 individual trim tabs on the back and a turn fin. The problem you might run into is chine walk (when the boat rocks side to side at speed) but you can control that with the outside trim tabs and small adjustments.
I would basically set the back up like this….
I would basically set the back up like this….
Attachments
- Joined
- May 6, 2023
- Messages
- 3
Sightler boats were great back in the day and in much demand. What ever you decide, just enjoy. Neil was a great guy.
- Joined
- Oct 27, 2005
- Messages
- 7,301
I had a splash of one that I got from John Pavlisko of the Sarasota club
I put a Picco Comp 90 in it and had a blast with it . Sold it to Mike Culhane in St Pete. Danny King might remember it .
I put a Picco Comp 90 in it and had a blast with it . Sold it to Mike Culhane in St Pete. Danny King might remember it .
- Joined
- Oct 2, 2005
- Messages
- 8,056
Wonder if that was one of A.T. Wrights "Lazer" hulls
A.T. had a hobby shop up here in Orange Park, FL. Way back,
I had one of his "Splashes" for a good many years.
Similar threads
