Emeraldtarpon
Member
- Joined
- Sep 7, 2024
- Messages
- 21
Hi guys,
i have a 5mm mounting screw depth on my 2860 motor, I assume the 5mm refers to how much of the screw enters the threads on the motor?
So I assume I would measure the screw depth from the mounting surface that comes in contact with the motor...Not from the front side (shaft side) of the mount mount.
So would it be good practice to measure the thickness of the motor mount and add that into the overall equation?
Eg - 5mm screw depth in motor + the thickness of the motor mount (4mm) - I need 9mm screws...is this correct?
Thank you for your help, cheers guys.
i have a 5mm mounting screw depth on my 2860 motor, I assume the 5mm refers to how much of the screw enters the threads on the motor?
So I assume I would measure the screw depth from the mounting surface that comes in contact with the motor...Not from the front side (shaft side) of the mount mount.
So would it be good practice to measure the thickness of the motor mount and add that into the overall equation?
Eg - 5mm screw depth in motor + the thickness of the motor mount (4mm) - I need 9mm screws...is this correct?
Thank you for your help, cheers guys.
